Overview | "Milling cutter with shank"Generic terms Subcategories Accessories |
|  | | | | | | Picture | | | | Order | | | |
|
|
from £ 6.14*
per piece |
| |
End Mill C27314.0 (1 offer) Long series end mill with 4 flutes, diameter 14mm with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
from £ 82.462*
per piece |
| |
Step drill bit HSS-TiN M10-M40, 10,0 mm, 125,5 mm (1 offer) Step drill bit HSS-TiN M10-M40, 10,0 mm, 125,5 mm; Tapping drill holes for cable fittings: Diameter 6-8.5-10.5-14.5-18.5-23.5-30.5-38.5 mm; M10x1.5-M12x1.5-M16x1.5-M20x1.5-M25x1.5-M32x1.5-M40x1.5; ... |
|
from £ 110.74*
per piece |
| |
1/2" Reduced Parallel Shank Drill A17011/16 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6875" (11/16) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 27.626*
per piece |
| |
End Mill C2735/8 (1 offer) Long series end mill with 4 flutes, diameter 5/8" with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
from £ 99.189*
per piece |
| |
|
|
from £ 99.75*
per piece |
| |
1/2" Reduced Parallel Shank Drill A17013.0 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 13mm with an overall length of 156mm and flute length of 83mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 20.671*
per piece |
| |
End Mill C24713.0 (1 offer) Short series end mill with 4 flutes, diameter 13mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
from £ 70.536*
per piece |
| |
HSS-AlTiN step drill bits M10-M40, 10,0 mm, 125,5 mm (1 offer) HSS-AlTiN step drill bits M10-M40, 10,0 mm, 125,5 mm; Tapping drill holes for cable fittings: Diameter 6-8.5-10.5-14.5-18.5-23.5-30.5-38.5 mm; M10x1.5-M12x1.5-M16x1.5-M20x1.5-M25x1.5-M32x1.5-M40x1.... |
|
from £ 117.13*
per piece |
| |
End Mill C27315.0 (1 offer) Long series end mill with 4 flutes, diameter 15mm with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
from £ 97.189*
per piece |
| |
1/2" Reduced Parallel Shank Drill A17013/16 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.8125" (13/16) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 40.734*
per piece |
| |
End Mill C24715.0 (1 offer) Short series end mill with 4 flutes, diameter 15mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
from £ 78.946*
per piece |
| |
1/2" Reduced Parallel Shank Drill A17014.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 14mm with an overall length of 156mm and flute length of 83mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 26.91*
per piece |
| |
End Mill C27316.0 (1 offer) Long series end mill with 4 flutes, diameter 16mm with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
from £ 98.659*
per piece |
| |
|
|
from £ 1.03*
per piece |
| |
|
