 | | | | |
Picture | | | | Order |
|
|
|
End Mill C2731/4 (1 offer) Long series end mill with 4 flutes, diameter 1/4" with 30mm length of cut and 80mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
from £ 56.395*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17039/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6094" (39/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 28.969*
per piece |
|
|
End Mill C2736.0 (1 offer) Long series end mill with 4 flutes, diameter 6mm with 24mm length of cut and 68mm overall length, according to DIN 844 L standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
from £ 40.243*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17041/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6406" (41/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 34.606*
per piece |
|
|
End Mill S9048.0 (1 offer) Regular length end mill with 4 flutes, diameter 8mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
from £ 25.701*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17043/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6719" (43/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 27.636*
per piece |
|
|
End Mill C2476.5 (1 offer) Short series end mill with 4 flutes, diameter 6.5mm with 16mm length of cut and 66mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright... |
|
from £ 47.876*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17045/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7031" (45/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 35.139*
per piece |
|
|
End Mill S9046.0 (1 offer) Regular length end mill with 4 flutes, diameter 6mm with 19mm length of cut, 57mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 6mm plain shank, solid ca... |
|
from £ 18.979*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17047/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7344" (47/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 38.318*
per piece |
|
|
End Mill S9047.0 (1 offer) Regular length end mill with 4 flutes, diameter 7mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
from £ 27.035*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17049/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7656" (49/64) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 36.025*
per piece |
|
|
|
|
from £ 18.72*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A1705/8 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6250" (5/8) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with s... |
|
from £ 21.144*
per piece |
|
|
End Mill C2737.0 (1 offer) Long series end mill with 4 flutes, diameter 7mm with 30mm length of cut and 80mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
from £ 56.865*
per piece |
|
|
