Schneider Electric Preventa XPS MC Series Safety Controller, 32 Safety Inputs, 10 Safety Outputs, 24 V dc / 464940

Stock numbers ; 464-946 464-946 and ; 464-930 464-930 are starter kits. These contain the safety controller, XPS-MCWIN configuration software, USB to 8 pin male connector cable, 8 pin female mini DIN to RJ45 cable, sub 25 way male connector to RJ45 cable, cage clamp terminal set and screw clamp terminal set To connect XPS-MC to a PC for programming and diagnostic purposes: Laptop PC with 9 pin serial port: use RS 382-2645 and 544-490 Laptop PC with USB port: use RS 464-962 and RS 218-080. XPS MC, Configurable Safety Controllers, Base Units. Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category 4 of standard EN 954-1/ISO 13849-1 and SIL 3 requirements of standard IEC 61508. Incorporates an interface for communicating with operator dialogue terminals (Magelis) or PLCs. 8 control inputs as standard LEDs on the front face enable simple and visual diagnostics Communication via Modbus 30 certified safety functions can be assigned to the safety outputs, these are configured using the XPS MCWIN software (see stock no ; 464-899 464-899 ) Required safety function can be selected after receipt of the product.