milling & lathing  (422 offers of 5,360,110 product items)

Fully hard metal milling cutter, 2 cutting edges, milling width: 2.0 mm

Type = Parting Off Turning Tool Overall Length = 110 mm Grade = T8330 Thickness = 3.1mm

Approach Angle = 95° Series = CCMT For Use With = SCLCR 06 Length = 6.4mm Height = 2.38mm

Lathe Part = Lathe Chuck Series = 950 For Use With = Magnetic Chucks

SCLCR Boring Kit. SCLCR Tool kit for internal turning of bores down to 11 mm in diameter. All 3 bars in this kit take the same insert and are suitable for use on a wide range of materials. With cut...

Single-sided positive turning insert, 80° rhomboid with 7° clearance, inscribed circle diameter of 6.35mm, 2.38mm thick, 0.4mm nose radius, indexing accuracy according to ISO-tolerance class-M, chi...

Pramet CCMT Insert. CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC...

Pramet XLCFN Lathe Tool Set. A parting kit containing holder and T8330 graded inserts for radial parting and grooving applications. Back stop incorporated within inserts for improved depth control....

Type = Parting Off Turning Tool Grade = T8330 Thickness = 4.1mm

Pramet CCMT Insert. CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC...

Approach Angle = 95° Series = CCMT For Use With = SCLCR 09 Length = 9.7mm Height = 3.97mm

Pramet CCMT Insert. CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC...

Pramet CCMT Insert. CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC...

Pramet CCMT Insert. CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC...

Pramet CNMG Insert. For use with DCLN, PCBN, PCKN and PCLN Holders ; Bars. T9315. Excellent for machining Steel Acceptable for Cast Iron and Hardened Steels. T9325. Excellent for machining Steel an...