|  | | | | | | Picture | | | | Order | | |
End Mill C2471/2 (1 offer) Short series end mill with 4 flutes, diameter 1/2" with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 76.864*
per piece |
| |
End Mill C2471/4 (1 offer) Short series end mill with 4 flutes, diameter 1/4" with 16mm length of cut and 66mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 52.114*
per piece |
| |
End Mill C2471/8 (1 offer) Short series end mill with 4 flutes, diameter 1/8" with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 35.957*
per piece |
| |
End Mill C24710.0 (1 offer) Short series end mill with 4 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 31.5mm reach with neck relief, according to DIN 844 K standard with a 10mm Weldon shank, powder m... |
|
£ 48.798*
per piece |
| |
End Mill C24712.0 (1 offer) Short series end mill with 4 flutes, diameter 12mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 57.599*
per piece |
| |
End Mill C24713.0 (1 offer) Short series end mill with 4 flutes, diameter 13mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 76.864*
per piece |
| |
End Mill C24714.0 (1 offer) Short series end mill with 4 flutes, diameter 14mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 72.063*
per piece |
| |
End Mill C24715.0 (1 offer) Short series end mill with 4 flutes, diameter 15mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
£ 85.576*
per piece |
| |
End Mill C24716.0 (1 offer) Short series end mill with 4 flutes, diameter 16mm with 32mm length of cut, 92mm overall length and 43.5mm reach with neck relief, according to DIN 844 K standard with a 16mm Weldon shank, powder m... |
|
£ 86.457*
per piece |
| |
End Mill C24718.0 (1 offer) Short series end mill with 4 flutes, diameter 18mm with 32mm length of cut, 92mm overall length and 43.5mm reach with neck relief, according to DIN 844 K standard with a 16mm Weldon shank, powder m... |
|
£ 97.842*
per piece |
| |
End Mill C2472.0 (1 offer) Short series end mill with 4 flutes, diameter 2mm with 7mm length of cut and 51mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 37.33*
per piece |
| |
End Mill C2472.5 (1 offer) Short series end mill with 4 flutes, diameter 2.5mm with 8mm length of cut and 52mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 38.323*
per piece |
| |
End Mill C24720.0 (1 offer) Short series end mill with 4 flutes, diameter 20mm with 38mm length of cut, 104mm overall length and 53.5mm reach with neck relief, according to DIN 844 K standard with a 20mm Weldon shank, powder ... |
|
£ 115.227*
per piece |
| |
End Mill C24725.0 (1 offer) Short series end mill with 5 flutes, diameter 25mm with 45mm length of cut, 121mm overall length and 64.5mm reach with neck relief, according to DIN 844 K standard with a 25mm Weldon shank, powder ... |
|
£ 191.734*
per piece |
| |
End Mill C2473.0 (1 offer) Short series end mill with 4 flutes, diameter 3mm with 8mm length of cut and 52mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 35.254*
per piece |
| |
|
