| | | | |
Picture | | | | Order |
|
|
3M™ Scotch-Weld Threadlocker TL42 10ml (1 offer) TL42 is a blue, general purpose, medium strength, thixotropic anaerobic thread locker, which cures when confined in the absence of air, on close-fitting metal surfaces. |
|
from £ 13.232* per piece |
|
|
|
|
from £ 2.94* per piece |
|
|
|
|
from £ 12.60* per piece |
|
|
|
|
from £ 2.76* per piece |
|
|
|
|
from £ 12.60* per piece |
|
|
|
|
from £ 2.76* per piece |
|
|
|
|
from £ 12.60* per piece |
|
|
|
|
from £ 11.85* per piece |
|
|
Bondloc B638-10 B638 High Strength Retainer 10ml (3 offers) Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress. It is a cylindrical parts supplemen... |
|
from £ 2.76* per piece |
|
|
|
|
from £ 12.60* per piece |
|
|
Bondloc B641-10 B641 Bearing Fit 10ml (3 offers) Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. It will secure all types and sizes of bearing... |
|
from £ 2.76* per piece |
|
|
|
|
from £ 12.60* per piece |
|
|
Draper 24657 D222 Thread Lock (1 offer) Ideal for low-strength thread locking on adjusting screws, countersunk head screws and set screws. Very good on low strength metals which could break during disassembly. Low strength break away - 6... |
|
from £ 8.54* per piece |
|
|
Draper 24659 D270 Stud Lock (1 offer) High strength (40Nm break away) general purpose adhesive for permanent threaded assemblies. Secures studs up to 13mm, sealing against leakage and corrosion. Chemical resistant while also resisting ... |
|
from £ 8.47* per piece |
|
|
Draper 24660 D243 Nut Lock (1 offer) Medium strength (16Nm break away) oil tolerant design for direct application onto parts where a light oily film exists or where surrounding parts contamination is a problem. Display packed. |
|
from £ 8.53* per piece |
|
|