Threadlocking & Retaining Adhesives (94 items)

Medium strength anaerobic, allows for disassembly, thixotropic non-drip formula. For nuts, bolts, screws and threads. Can be used on oil contaminated parts.

Bondloc B243 is an Anaerobic formulation designed to be used on parts in an as received condition, such as those with protective films (oils) etc. Oil tolerant B243 is designed for direct applicati...

Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-res...

Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress. It is a cylindrical parts supplemen...

Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. It will secure all types and sizes of bearing...

Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222’s Anaerobic nature allows it to cure only when confined betw...

A one-part, air-curing sealing compound for fixing screws, variable components etc., where evidence of tampering is required e.g. For calibration and warranty applications.

A one-part, air-curing sealing compound for fixing screws, variable components etc., where evidence of tampering is required e.g. For calibration and warranty applications.

Loctite 2400 is a medium threadlocker formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration. It works on all metals and passive substrates. Slight contamination ...

Loctite 2700 is a high-strength threadlocker formulated for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. It serves to permanently loc...

Retains bearings, even under high rotational loading. Keeps full strength with no fatigue under load stress and has low corrosiveness.Model NoSCS601SNett Weight:0.08KgPack Qty:1Size:50ml

A low strength thread lock for all types of metal threaded fasteners. Prevents fasteners loosening due to vibration and seals against leakage, whilst still allowing easy disassembly of treated part...

Designed for cylindrical fitting parts. Cures once confined in the absence of air in close fitting joints.Model NoSCS638SNett Weight:0.08KgPack Qty:1Size:50ml Bottle

A medium to high strength nut lock for all types of metal threaded fasteners. Can be used on plated parts up to 50mm.Model NoSCS243SFixture Time:5-8min @ 23°CFull Cure Time:4hr @ 23°C on Steel, 24h...

High strength stud locking adhesive for all types of metal. Rapid fixing time of 15-20 minutes on normal plated, oiled metal surfaces and fixtures. Works on steel, aluminium, stainless steel and zi...