| |
|
| Item number: CIEN9-59331891 Manufacturer no.: 5092954 EAN/GTIN: 5011867114088 |
| |
|
| | |
| Hammerite Underbody Seal gives heavy duty protection for underbody,wheel arches and other high impact areas More information: Packaging data | Package width | 65 mm | | Package depth | 65 mm | | Package height | 283 mm | | Package weight | 570 g | Features | Paint volume | 0.6 L | | Suitable for outdoor use | Yes | | Colour name | Black | | Finish type | Matt | | Best uses | Furniture | | Composition | Solvent-based | | Coverage per pack | 1 m² | | Suitable for materials | Metal | | Number of coats | 2 | | Recoat after (min) | 1 h | | Recoat after (max) | 2 h | | Minimum drying time | 1 h | | Maximum drying time | 2 h | | Volatile organic compounds (VOC) content labelling system | Very high (>50%) | | Dispenser type | Spray | | Surface preparation | Remove heavy deposits of dirt, grease and oil.Wire brush-off loose rust and paint.Ensure surface is clean and dry. Shake the can vigorously for at least 3 minutes after hearing the agitator ball | | How to use | Do not apply to sump, gearbox, exhaust system, cables or any mechanical parts.Spray from a distance of 25cm in a side to side motion, keeping the can in an upright position.Apply a minimum of 2 coats, allowing at least 1-2 hours between coats.To prevent blockages, turn can upside down and spray for 2 seconds between coats and after use.Allow to dry overnight.To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit. | | Tool cleaning | To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit | | HSE note | Flame, Health hazard, Exclamation mark, Environment Danger Contains Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%)Extremely flammable aerosol. Pressurized container: may burst if heated. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not breathe dust or mist. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations. | Logistics data | Master (outer) case width | 195 mm | | Master (outer) case height | 286 mm | | Layers per pallet | 3 pc(s) |
|
| | |
| | | |
| Other search terms: Paint sprays, Color spray, Color sprays, Marker spray, Marker sprays, Marking spray, Marking sprays, Acrylic paint spray, Acrylic paint sprays, Enamel aerosol, Lacquer spray, Lacquer sprays, Spray paint, Model building spray, Model building sprays, Preparation swab, Preparation swabs, Prepare swab, Prepare swabs, Preparation wipe, Preparation wipes, Underbody protection, Underbody seal, Underbody spray, Stonechip shield aerosol, black spray paint, acrylic paint spray |
| | |
| |