Hammerite Rust Remover Dip

Logistics data

Layers per pallet

4 pc(s)

Master (outer) case width

160 mm

Master (outer) case height

154 mm

Packaging data

Package width

75 mm

Package depth

75 mm

Package height

163 mm

Package weight

600 g

Features

Dispenser type

Bottle

Volume

500 ml

Best uses

Bolt, Fence, Furniture, Nut, Tool, Vehicle

Suitable for indoor use

Yes

Suitable for outdoor use

Yes

Tool cleaning

Clean container with water. Hammerite Rust Remover Dip should be stored in a dry well ventilated area. Protect from frost and direct sunlight.

Surface preparation

Remove loose rust with a wire brush or coarse sandpaper

How to use

Shake container well and pour required amount into a plastic container. Dilute 1 part Rust Remover Dip with 9 parts water and mix thoroughly.Place rusty item into container and leave overnight. Rinse thoroughly under running water and remove remaining rust with a wire brush. Allow time to dry. If rust is not completely removed repeat process for a further 24 hours.To avoid any further rusting coat surface with Hammerite paint. Do not return any surplus Hammerite Rust Remover Dip back into the original container after use.

HSE note

Exclamation mark Warning Causes serious eye irritation. Keep out of reach of children. If medical advice is needed have product container or label at hand.Do not get in eyes, on skin, or on clothing. Wash hands thoroughly after handling. Call a POISON CENTER or doctor if you feel unwell. Dispose of contents and container in accordance with all local, regional, national or international regulations. Contains a biocidal product: Contains C(M)IT/MIT(3:1). May produce an allergic reaction.

Volatile organic compounds (VOC) content labelling system

Minimal (0 - 0.29%)