|  |
| |
| Item number:
CIEN7-7065712 Manufacturer no.:
JC101A EAN/GTIN:
6934648010609 |
| |
|
| | |
| HP A5800 switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. Besides wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP) that allow local or geographically distributed A5800 switches to be interconnected for higher resiliency and performance. Available in PoE and non-PoE models and 1 RU and 2 RU flex chassis configurations, A5800 switches are built on open standards and include an open application architecture (OAA) module slot that that enables flexible deployment options for new services. These versatile switches are ideal for use in the network core for a building or department, or as a high-performance switch in the convergence layer or network edge of enterprise campus networks.
Quality of Service (QoS)
• Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
Management
• Remote configuration and management: is available through a secure Web browser or a command-line interface (CLI)
Connectivity
• High-density port connectivity: supports up to 84 1-Gigabit ports per unit/612 per stack
Performance
• Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM based) helps ensure high levels of security and ease of administration without impacting network performance
Manageability
• Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI)
Layer 2 switching
• GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network More information: Security | DHCP features | DHCP server, DHCP client | | Access Control List (ACL) | Yes | | IGMP snooping | Yes | | Security algorithms | 802.1x RADIUS, SSH, SSL/TLS | | MAC address filtering | Yes | | SSH/SSL support | Yes | Power over Ethernet (PoE) | Power over Ethernet (PoE) | Yes | Design | Product colour | Black | | Safety | UL, EN, IEC, CAN/CSA, Anatel, ULAR, GOST, FDA, NOM, ROHS | | Electromagnetic compatibility | VCCI, EN, ICES, ANSI, AS/NZS, EMC, FCC | Performance | Memory type | SDRAM | | Internal memory | 512 MB | | Flash memory | 512 MB | Weight & dimensions | Weight | 18000 g | Operational conditions | Operating temperature (T-T) | 0 - 45 °C | | Operating relative humidity (H-H) | 10 - 90 % | | Operating temperature (T-T) | 32 - 113 °F | | Heat dissipation | 6278 BTU/h | Power | Input voltage | 100 - 240 V | Data transmission | MAC address table | 32000 entries | | Switching capacity | 284 Gbit/s | | Supported data transfer rates | 10/100 Mbps | | Throughput | 211 mpps Mpps | | Maximum data transfer rate | 1 Gbit/s | | Packet buffer memory | 8 MB | Other features | Dimensions (WxDxH) | 465 x 440 x 86.1 mm | | Connectivity technology | Wired | | Power supply | 300 W | | Networking features | Gigabit Ethernet | | Input frequency | 50/60 Hz | | Weight (imperial) | 39.7 lbs | | Dimensions (W x D x H) (imperial) | 17.32 x 18.31 x 3.39 " | Network | Networking standards | IEEE 802.1ag, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x | | Copper ethernet cabling technology | 1000BASE-T, 1000BASE-TX, 100BASE-TX, 10BASE-T | | Full duplex | Yes | | IP routing | Yes | | Routing entries | 16000 | | Flow control support | Yes | | Link aggregation | Yes | | Spanning tree protocol | Yes | | Number of VLANs | 4096 | Ports & interfaces | Basic switching RJ-45 Ethernet ports quantity | 48 | | SFP/SFP+ slots quantity | 4 | | SFP module slots quantity | 2 | | Console port | RS-232 | Multicast features | Multicast support | Yes | Management features | Switch type | Managed | | Switch layer | L3 | | Quality of Service (QoS) support | Yes | | System event log | Yes | | MIB support | MIB II, Bridge MIB, BGP-4 MIB, RIPv2 MIB, OSPFv2 MIB, IPV6-TCP-MIB, IPV6-UDP-MIB, IPv6 MIB, ICMPv6 MIB, SNMP-MPD MIB, Ethernet-Like-MIB, VRRP MIB, MAU-MIB, MAU-MIB, Entity MIB | Protocols | Management protocols | IGMP, SNMPv1/v2c/v3 | | Data link protocols | LLDP | | Supported network protocols | IPv6, CMPv6, UDP, ICMP, TCP, ARP, Telnet, BOOTP, TFTP |
|
| | |
| | | |
| Other search terms: switch, switches, ethernet switch, ethernet switches, network switch, network switches, switching hub, switching hubs, bridging hub, bridging hubs, MAC bridge, MAC bridges, managed switch, managed switches, unmanaged switch, unmanaged switches, LAN, Local Area Network |
| | |
| |