Cuprinol Garden Furniture Stain Clear 0.75 L

Features

Suitable for outdoor use

Yes

Best uses

Furniture

Volume

0.75 L

Surface coverage

15 m²/L

Colour name

Clear

Composition

Water-based

Opacity

Translucent

Number of coats (min)

2

Number of coats (max)

3

Minimum drying time

2 h

Maximum drying time

6 h

Drying time note

Dependent on the nature of the surface and the weather conditions

Recoat after

6 h

Volatile organic compounds (VOC) content

55 g/l

Volatile organic compounds (VOC) content labelling system

Low (0.3 - 7.99%)

Tool cleaning

Remove as much stain as possible from equipment before cleaning with water

Disposal

Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk

How to use

Stir thoroughly before use. Apply 2-3 coats. Brush on evenly along the grain avoiding overlaps. Allow 2-6 hours between coats under normal weather conditions. Allow a few days before heavy use or contact with soft furnishings. Final colour will depend on wood type, previous treatment and the number of coats applied. Do not apply in temperatures below 5 degrees C, in damp conditions or if rain is likely before the product has dried.

How to store

Do not use or store in extremes of temperature or wet conditions

Surface preparation

Remove excessive dirt and soiling, large areas of algae, lichen, fungi or moss with a scraper or stiff brush, then sand and clean the surface. To prevent against rot and blue stain, treat with an appropriate wood preserver. Suitable for use on bare or previously stained garden furniture. Wipe bare oily timbers such as teak with white spirit and allow to dry fully before application of this product.

Logistics data

Layers per pallet

7 pc(s)

Packaging data

Package width

101 mm

Package depth

101 mm

Package height

119 mm

Package weight

890 g