Plugable Technologies USB to Serial Adapter Compatible with Windows, Mac, Linux

This adapter will let you connect older serial devices to modern computers, for terminal services, data transferring, remote control, and programming. Supports baud rates from 75bps to 12Mbps, multiple stop bit and parity types. Connect legacy RS-232 serial devices to any modern computer Plugable's USB to Serial Adapter features Prolific's PL-2303HX Rev D chip for the best combination of support and performance with a wide range of RS-232 serial devices. Drivers are built-into Windows 11, 10, 8.x, 7, and most Linux distributions, drivers are available for Windows XP, Vista, and macOS. Connect legacy RS-232 serial devices to any modern computer This adapter replaces a legacy built-in or PCI serial port and features a fixed male port with screw in connection. For connecting devices that also have a male connector an inexpensive DB9 coupler or standard serial cable can be purchased separately. Compatibility Works with devices with RS-232 serial ports such as other PCs with RS-232 ports, Bluetooth serial adapters, telescopes, amateur radio gear, GPS receivers, routers, firewalls, modems, plotters, embedded character displays, scan tools, sonar units, embedded boards and many others. Specific devices include: Garmin eTrex GPS, Seiko Label Printer, iRobot Create, Cisco products with serial consoles, US Robotics Modems, NexStar telescopes, Equus Scan Tools, Uniden Hand Held Scanners, etc. Works with software like: HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etc. Genuine We use only genuine Prolific serial chipsets in our adapter. Some inexpensive serial adapters use cloned Prolific serial chipsets that will not work with the latest Prolific drivers, both those available for download and the drivers embedded in Windows. Because we only use genuine Prolific chips, our adapter is always compatible with the latest drivers from Prolific.