PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing dual SFP slots; accept 100FX or 1000X SFP module, and other features shown below: - DIP Switch for 100FX or 1000X SFP module supports on dual SFP slots - DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode - Redundant Hardware Fiber Port Highly Convenient and Distance Extendable The GT-1205A is equipped with one 10/100/1000BASE-T port and dual SFP slots to support conversion between 10/100/1000BASE-T and 100/1000BASE-X network. The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types. The GT-1205A provides high reliability and flexibility to extend the media transmission distance up to 550m or 2km (multi-mode fiber) and 10km or longer 20/40/80/120 kilometers (single-mode fiber or WDM fiber), depending on the optional 100/1000BASE-SX/LX SFP modules. Adjustable DIP Switch for 100FX or 1000X SFP Module Selection Via the built-in DIP switch on rear panel, the GT-1205A can be configured as supports 100BASE-FX SFP module or 1000BASE-X SFP module on its dual SFP slots, the GT-1205A can be connected over fiber optic cabling at a distance extended from 550 meters to 2km (multi-mode fiber) to 10/20/40/80/120 kilometers (single-mode fiber or WDM fiber), using the PLANET MFB/MGB series 100/1000BASE-X SFP modules. Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode Via the built-in DIP switch, the GT-1205A can be configured as 3-port Ethernet switch or 2-port redundant media converter. In the 3-port switch mode, the GT-1205A can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 2-port redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair. Easy Deployment Standalone or with Chassis The GT-1205A Gigabit Media Converter can be used as a standalone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700 and MC-1500 chassis series. These media chassis can assist in providing DC power to the GT-1205A Gigabit Media Converter and the fiber-optic network can be maintained at one central location. With the 3-port switch mode, they work in high performance Store and Forward mechanism, and prevent packet loss with IEEE 802.3x Flow Control (Full-duplex) and Back Pressure (Half-duplex) function. Plug & Play Installation As the GT-1205A Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/FX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy simply by using the plug and play feature. More information: Management features | Plug and Play | Yes | Design | LED indicators | Yes | | Product colour | Black | | DIN rail mounting | Yes | | Certification | FCC Class B, CE | Operational conditions | Operating temperature (T-T) | 0 - 50 °C | | Storage temperature (T-T) | -10 - 70 °C | | Operating relative humidity (H-H) | 5 - 95 % | | Storage relative humidity (H-H) | 5 - 95 % | Power | Input voltage | 5 V | | Input current | 2 A | Performance | Maximum transfer distance | 120000 m | Ports & interfaces | Fiber optic connector | SFP | | Connectivity technology | Wired | | Ethernet LAN (RJ-45) ports | 1 | | Fiber ports quantity | 2 | Weight & dimensions | Width | 94 mm | | Depth | 70 mm | | Height | 26 mm | | Weight | 180 g | Technical details | Harmonized System (HS) code | 85176990 | Network | Maximum data transfer rate | 1000 Mbit/s | | Converter input interface | 1000Base-T | | Converter output interface | 1000Base-X | | Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z | | Ethernet interface type | Gigabit Ethernet | | Ethernet LAN data rates | 10,100,1000 Mbit/s | | Auto MDI/MDI-X | Yes | | Duplex system | Full, Half |
|