Inverter welder; 4.1kVA; 230VAC; 19A; 50/60Hz; MMA,TIG; IP21; 56V

Attention!
This product is sold up to the quantity available in stock. In case of larger orders, the amount will be replaced by the available quantity.

Manufacturer: STAMOS
Kind of display used: LED
IP rating: IP21
Supply voltage: 230V AC
Insulation class: F
Power consumption: 4.1kVA
Kit contents: welding mask;hammer with a wire brush;TIG welding holder with 3,8m cable;MMA welding holder with cable;ground clamp with cable
Input current: 19A
Efficiency: 85%
Supply voltage frequency: 50/60Hz
Type of device: inverter welder
Duty cycle factor: 10...90%
Power factor: ≥0.7
Plug variant: EU
Dimensions (a x b x c): 325x510x365mm
Welding method: MMA;TIG
Welding current TIG-DC: 5...200A
Welding current TIG-AC: 20...200A
Welding current MMA: 10...200A
Nominal duty cycle: 60%
Open circuit voltage: 56V
Welding current at 100% duty cycle: 154A
Welding current at 60% duty cycle: 200A
Electrode diameter (TIG): 1...3.2mm
Electrode diameter (MMA): 1...4mm
Method of cooling the handle: air
Pulse frequency DC mode: 0.2...25Hz
Gas flow time after welding: 1...10s
AC current balance: 20...80%
Pulse current in PULSE mode: 5...200A
Welding equipment features: ARC FORCE - electrical arc stablization;ANTI STICK - prevents electrode from sticking to welding material;HOT START - easy to initiate an electrical arc;TIG HF - non-contact electrical arc ignition using high frequency;possibility to set current upslope and downslope time;PULS - possibility of pulse current welding;2 T / 4 T change-over switch;MOSFET technology;TIG AC - welding of aluminum and non-ferrous metals (brass, bronze);integrated solenoid gas valve;connector for connecting a pedal;possibility to set gas flow time after welding
Output current frequency in AC mode: 60Hz
Display parameters: 3 digit