RS PRO APT330 1/2 in Air Ratchet, 150rpm, 60Nm / 7398385

RS PRO APT330 1/2-inch Air Ratchet, 150 rpm, 60 NmThe RS PRO APT330 1/2-inch air ratchet is ideally suited for use with radiators, fuel pumps and small engine parts. The lightweight, aluminium ratcheting socket air wrench is comfortable to use, with a forward / reverse knob on the ratchet head that works in the same way as manual ratchets. You can control the speed easily with a simple squeeze of the progressive throttle. The ball-type retainer makes switching between different sockets and accessories straightforward. It weighs 1.2 kg and has a length of 266 mm, so you can use it even in hard-to-reach spaces. Its powered by compressed air at a pressure of 90 psi/6.2 bar that enters through a standard 1/4-inch BSP threaded inlet. Air ratchet drivers are used to quickly tighten or loosen fasteners and fixings. Theyre frequently found in the automotive industry.Features and Benefits• Air ratchet • 1/2-inch drive • Maximum torque of 60 Nm • 1/4-inch BSP air inlet • Maximum permissible operating pressure of 90 psi / 6.2 bar • Recommended operating pressure of 90 psi / 6.2 bar • Average air consumption of 101 litres / 3.6 cubic feet per minute • Speed of 150 rpm • Vibration of 5.2 m/s² • Length of 266 mm • Sound level of 90 dBA • Complies with the American National Standards Institute Electrostatic Discharge Association S20.20:2014 and British Standard European Norm 61340-5-1:2007 standards for electrostatic controlRS PRORS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.