Eaton 3P Pole Panel Mount Isolator Switch - 160A Maximum Current, 55kW Power Rating, IP65 / 6217894

Eaton Rear of Panel Mounted Switch Disconnectors. The P and T range of non-fused switch disconnectors from Eaton provides safe switching, isolating and control. Robust and reliable, these high-performance devices are used primarily in industrial and engineering applications. With the added IP65 ingress protection rating they are ideal for use in harsh environments or applications that require extra protection. Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able to carry out the necessary works without any electrical risks. Features and Benefits. Compact and durable Clear position indication Padlockable in the OFF position with up to 3 x 8 mm padlocks Rear mounting, easily and quickly fitted on to DIN rail or a base plate P series switches can be mounted in electrical cabinets or enclosures up to 400mm deep with an additional extension shaft. Applications. The Eaton P and T series of manually operated switch disconnectors are used in a wide range of industrial applications and installations. Some of the most common are. Machine control panels Isolation of circuit breakers Transformers and transmission lines Switchgear panels Distribution panels Consumer units. Suitable Accessories include: Extended shaft kits Part number ; 323-173 323-173 is an extended shaft kit for 20, 25 and 32A disconnect switches. They are 25mm long and up to 4 can be connected if required. Part number ; 323-189 323-189 is an extended shaft kit for 63,85 and 100A disconnect switches. They are 25mm long and up to 4 can be connected if required. Neutral blocks Part number ; 333-495 333-495 for a 3 pole 25A add-on neutral block Part number ; 333-502 333-502 for a 3 pole 32A add-on neutral block Part number ; 333-518 333-518 for a 3 pole 63A add-on neutral block Contact Blocks Part number ; 333-546 333-546 for a NO/NC 10A auxiliary contact block for the rear of the panel switch disconnectors. Maximum 2 blocks per switch. What is the difference between a fused switch disconnector and a non-fused switch disconnector?. Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.