Eaton Deep Base for use with Flashni, RoLP Sounder Beacons / 5306072

This product exceeds the requirements of En54-3 but is not designed to meet EN54-23. Where the Construction Product Directive or Regulation (CPD/CPR) is a country requirement, it cannot be used, legally, for the purpose of alerting room occupants to a Fire Alarm condition. For Countries where CPD/CPR does not apply, this note should be disregarded. Fulleon Flashni Sounder Beacon. Requiring just one single installation point, the Flashni range of audible and visual devices are an ideal choice within industrial and commercial installations. A Flashni is a type of sounder beacon, created and designed to be less obtrusive - replacing the standard two device sounder and beacon solution. The Flashni range of sounder beacons are suitable for fire, industrial and signalling application that requires a combined indication device. Features ; Benefits. Reduced installation costs due to the single installation point High output sounder beacon Automatic sounder synchronisation Suitable for a multitude of applications Provides tone clarity, reducing confusion Up to 103dB(A) with built-in Xenon flash Includes 32 user-selectable tones (within selected Flashni beacons ; sounders) Volume control to alter the alarm to suit the application Reverse polarity protected ABS cases and polycarbonate freznel lens Flash power of 0.7j Features and operating temperature of -10°C to +55°C Shallow bases have IP54 protection, this means that the beacon and sounder has a limited protected from ingress of dust and splashes of water from any direction. If the base is deep, it is totally protected again dust and low-pressure water jets from any given direction with an IP65 protection. Additional Extras. Red Deep Base - ; 530-6066 530-6066 White Deep Bas - ; 530-6072 530-6072 VdS approved Sounder ; Beacons - ; 530-6038 530-6038 , ; 530-6016 530-6016 , ; 529-4474 529-4474 , ; 529-4452 529-4452 and ; 529-4468 529-4468 The sounder and beacon elements for ; 529-4474 529-4474 and ; 529-4468 529-4468 are individually wired which enables them to be controlled separately 530-6038 530-6038 , ; 530-6016 530-6016 , ; 529-4474 529-4474 , ; 529-4452 529-4452 and ; 529-4468 529-4468 are EN54 part 3 compliant 529-4452 529-4452 is CPD compliant