 | | | | |
Picture | | | | Order |
|
|
|
1/2" Reduced Parallel Shank Drill A17017.0 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 17mm with an overall length of 157mm and flute length of 84mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 35.11*
per piece |
|
|
|
|
from £ 44.19*
per piece |
|
|
End Mill S90420.0 (1 offer) Regular length end mill with 4 flutes, diameter 20mm with 38mm length of cut, 104mm overall length and 0.3mm 45° chamfered corner edges, according to DORMER standard with a 20mm plain shank, solid ... |
|
from £ 134.729*
per piece |
|
|
End Mill C24720.0 (1 offer) Short series end mill with 4 flutes, diameter 20mm with 38mm length of cut, 104mm overall length and 53.5mm reach with neck relief, according to DIN 844 K standard with a 20mm Weldon shank, powder ... |
|
from £ 105.751*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17017/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.5313" (17/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 21.678*
per piece |
|
|
End Mill C27318.0 (1 offer) Long series end mill with 4 flutes, diameter 18mm with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
from £ 112.275*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17018.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 18mm with an overall length of 157mm and flute length of 84mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 38.46*
per piece |
|
|
End Mill C24725.0 (1 offer) Short series end mill with 5 flutes, diameter 25mm with 45mm length of cut, 121mm overall length and 64.5mm reach with neck relief, according to DIN 844 K standard with a 25mm Weldon shank, powder ... |
|
from £ 176.183*
per piece |
|
|
End Mill S9042.0 (1 offer) Regular length end mill with 4 flutes, diameter 2mm with 6mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid car... |
|
from £ 15.437*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17020.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 20mm with an overall length of 158mm and flute length of 81mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 44.44*
per piece |
|
|
End Mill C2472.0 (1 offer) Short series end mill with 4 flutes, diameter 2mm with 7mm length of cut and 51mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
from £ 34.33*
per piece |
|
|
|
|
from £ 2.20*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17019.5 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 19.5mm with an overall length of 158mm and flute length of 81mm according to DORMER standard with 118° point angle, HSS with steam t... |
|
from £ 36.255*
per piece |
|
|
|
|
from £ 46.15*
per piece |
|
|
End Mill S9042.5 (1 offer) Regular length end mill with 4 flutes, diameter 2.5mm with 9mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid c... |
|
from £ 18.496*
per piece |
|
|
