 | | | | |
Picture | | | | Order |
|
|
Slot Drill C1101 (1 offer) Extra short series slot drill with 2 flutes, diameter 1" with 26mm length of cut 102mm overall length and 45.5mm reach with neck relief, according to DIN 327 D standard with a 25mm Weldon shank, po... |
|
£ 32.878*
per piece |
|
|
End Mill S9033.0 (1 offer) Regular length end mill with 3 flutes, diameter 3mm with 12mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid ca... |
|
£ 20.701*
per piece |
|
|
Slot Drill C1101.5 (1 offer) Extra short series slot drill with 2 flutes, diameter 1.5mm with 3mm length of cut and 47mm overall length, according to DIN 327 D standard with a 6mm Weldon shank, powder metallurgical HSS-E with ... |
|
£ 28.265*
per piece |
|
|
Slot Drill C1101/16 (1 offer) Extra short series slot drill with 2 flutes, diameter 1/16" with 3mm length of cut and 47mm overall length, according to DIN 327 D standard with a 6mm Weldon shank, powder metallurgical HSS-E with ... |
|
£ 24.06*
per piece |
|
|
Slot Drill C1231/16 (1 offer) Short series slot drill with 2 flutes, diameter 1/16" with 7mm length of cut and 51mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright... |
|
£ 26.552*
per piece |
|
|
Slot Drill C1101/2 (1 offer) Extra short series slot drill with 2 flutes, diameter 1/2" with 16mm length of cut, 73mm overall length and 27.5mm reach with neck relief, according to DIN 327 D standard with a 12mm Weldon shank, ... |
|
£ 51.411*
per piece |
|
|
Slot Drill C1231/2 (1 offer) Short series slot drill with 2 flutes, diameter 1/2" with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder... |
|
£ 54.75*
per piece |
|
|
Slot Drill C1231/4 (1 offer) Short series slot drill with 2 flutes, diameter 1/4" with 16mm length of cut and 66mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with brigh... |
|
£ 33.482*
per piece |
|
|
Slot Drill C1101/8 (1 offer) Extra short series slot drill with 2 flutes, diameter 1/8" with 6mm length of cut and 50mm overall length, according to DIN 327 D standard with a 6mm Weldon shank, powder metallurgical HSS-E with b... |
|
£ 19.662*
per piece |
|
|
Slot Drill C11010.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 10mm with 13mm length of cut, 63mm overall length and 22.5mm reach with neck relief, according to DIN 327 D standard with a 10mm Weldon shank, ... |
|
from £ 24.80*
per piece |
|
|
Slot Drill C1231/8 (1 offer) Short series slot drill with 2 flutes, diameter 1/8" with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright... |
|
£ 25.632*
per piece |
|
|
Slot Drill C11012.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 12mm with 16mm length of cut, 73mm overall length and 27.5mm reach with neck relief, according to DIN 327 D standard with a 12mm Weldon shank, ... |
|
£ 34.72*
per piece |
|
|
Slot Drill C11011.0 (1 offer) Extra short series slot drill with 2 flutes, diameter 11mm with 13mm length of cut and 70mm overall length, according to DIN 327 D standard with a 12mm Weldon shank, powder metallurgical HSS-E with... |
|
from £ 33.423*
per piece |
|
|
End Mill S90210.0 (1 offer) Regular length end mill with 2 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 0.18mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid ... |
|
£ 52.302*
per piece |
|
|
End Mill S90310.0 (1 offer) Regular length end mill with 3 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid c... |
|
£ 52.302*
per piece |
|
|
