 | | | | |
Picture | | | | Order |
|
|
|
1/2" Reduced Parallel Shank Drill A17051/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7969" (51/64) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
£ 44.115*
per piece |
|
|
End Mill C2738.0 (1 offer) Long series end mill with 4 flutes, diameter 8mm with 38mm length of cut and 88mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
£ 55.282*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17053/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.8281" (53/64) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
£ 44.115*
per piece |
|
|
End Mill C2733/8 (1 offer) Long series end mill with 4 flutes, diameter 3/8" with 45mm length of cut, 95mm overall length and 54.5mm reach with neck relief, according to DIN 844 L standard with a 10mm Weldon shank, powder me... |
|
£ 67.192*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17055/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.8594" (55/64) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
£ 44.115*
per piece |
|
|
End Mill C2478.0 (1 offer) Short series end mill with 4 flutes, diameter 8mm with 19mm length of cut and 69mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 44.541*
per piece |
|
|
|
|
£ 12.465*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17059/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.9219" (59/64) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
£ 60.559*
per piece |
|
|
End Mill C2739.0 (1 offer) Long series end mill with 4 flutes, diameter 9mm with 38mm length of cut and 88mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
£ 67.192*
per piece |
|
|
|
|
£ 27.077*
per piece |
|
|
End Mill S9049.0 (1 offer) Regular length end mill with 4 flutes, diameter 9mm with 21mm length of cut, 72mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 10mm plain shank, solid c... |
|
£ 34.71*
per piece |
|
|
C019A x 1/4 TCT Two Flute Cutter 12.0 x 19.0mm (4 offers) The Trend C019A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in) Cutting Depth: 19mm (3/4in) Overall Length: 71mm Shank Diameter: 1/4in |
|
from £ 19.43*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A1707/8 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.8750" (7/8) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with steam... |
|
£ 45.25*
per piece |
|
|
|
|
£ 12.465*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A1709/16 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.5625" (9/16) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with ... |
|
£ 19.771*
per piece |
|
|
