 | | | | |
Picture | | | | Order |
|
|
|
|
|
from £ 2.21*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17019.5 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 19.5mm with an overall length of 158mm and flute length of 81mm according to DORMER standard with 118° point angle, HSS with steam t... |
|
£ 39.254*
per piece |
|
|
|
|
from £ 46.15*
per piece |
|
|
End Mill C2472.0 (1 offer) Short series end mill with 4 flutes, diameter 2mm with 7mm length of cut and 51mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 37.33*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17019/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.5938" (19/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
£ 29.01*
per piece |
|
|
End Mill C2471/8 (1 offer) Short series end mill with 4 flutes, diameter 1/8" with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 35.957*
per piece |
|
|
End Mill C2473.0 (1 offer) Short series end mill with 4 flutes, diameter 3mm with 8mm length of cut and 52mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 35.254*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17021.0 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 21mm with an overall length of 158mm and flute length of 82mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
£ 63.76*
per piece |
|
|
End Mill C2473.5 (1 offer) Short series end mill with 4 flutes, diameter 3.5mm with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 35.957*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17021/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6563" (21/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
£ 32.443*
per piece |
|
|
End Mill S9044.0 (1 offer) Regular length end mill with 4 flutes, diameter 4mm with 14mm length of cut, 50mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 4mm plain shank, solid ca... |
|
£ 17.533*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17022.0 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 22mm with an overall length of 158mm and flute length of 82mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
£ 44.115*
per piece |
|
|
End Mill S9043.0 (1 offer) Regular length end mill with 4 flutes, diameter 3mm with 12mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid ca... |
|
£ 15.365*
per piece |
|
|
End Mill C2473/16 (1 offer) Short series end mill with 4 flutes, diameter 3/16" with 13mm length of cut and 57mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 38.452*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17023/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7188" (23/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
£ 36.145*
per piece |
|
|
