 | | | | |
Picture | | | | Order |
|
|
|
1/2" Reduced Parallel Shank Drill A17016.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 16mm with an overall length of 157mm and flute length of 84mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 31.79*
per piece |
|
|
End Mill C27316.0 (1 offer) Long series end mill with 4 flutes, diameter 16mm with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
£ 107.524*
per piece |
|
|
Taper Shank Drill A13016.0 (3 offers) Jobber length drill with taper shank, diameter 16mm with an overall length of 218mm and flute length of 120mm according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered ... |
|
from £ 28.80*
per piece |
|
|
End Mill C24718.0 (1 offer) Short series end mill with 4 flutes, diameter 18mm with 32mm length of cut, 92mm overall length and 43.5mm reach with neck relief, according to DIN 844 K standard with a 16mm Weldon shank, powder m... |
|
£ 97.842*
per piece |
|
|
|
|
from £ 44.19*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17017.0 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 17mm with an overall length of 157mm and flute length of 84mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 35.29*
per piece |
|
|
End Mill S9042.0 (1 offer) Regular length end mill with 4 flutes, diameter 2mm with 6mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid car... |
|
£ 16.761*
per piece |
|
|
End Mill S9042.5 (1 offer) Regular length end mill with 4 flutes, diameter 2.5mm with 9mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid c... |
|
£ 20.137*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17017/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.5313" (17/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
£ 23.582*
per piece |
|
|
End Mill S90418.0 (1 offer) Regular length end mill with 4 flutes, diameter 18mm with 32mm length of cut, 92mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 18mm plain shank, solid c... |
|
£ 108.485*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17018.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 18mm with an overall length of 157mm and flute length of 84mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 38.43*
per piece |
|
|
End Mill C2472.5 (1 offer) Short series end mill with 4 flutes, diameter 2.5mm with 8mm length of cut and 52mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
£ 38.323*
per piece |
|
|
End Mill C2473.0 (1 offer) Short series end mill with 4 flutes, diameter 3mm with 8mm length of cut and 52mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
£ 35.254*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17020.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 20mm with an overall length of 158mm and flute length of 81mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 44.44*
per piece |
|
|
End Mill C2473.5 (1 offer) Short series end mill with 4 flutes, diameter 3.5mm with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
£ 35.957*
per piece |
|
|
