Polycell Polyfilla One Fill is a lightweight filler designed to fill deep gaps in one application without sagging or slumping - even on ceilings
Packaging data | Package width | 133 mm |
| Package depth | 133 mm |
| Package height | 130 mm |
| Package weight | 440 g |
Logistics data | Master (outer) case width | 276 mm |
| Master (outer) case height | 144 mm |
| Layers per pallet | 6 pc(s) |
Features | Suitable for indoor use | Yes |
| Volume | 1 L |
| Best uses | Ceiling, Wall |
| Drying time | 0.25 h |
| Drying time note | Can be over-painted in as little as 15 minutes. |
| Hardening time | 0.25 h |
| Recoat after | 0.25 h |
| Number of coats | 1 |
| Volatile organic compounds (VOC) content | 0.4 g/l |
| Volatile organic compounds (VOC) content labelling system | Minimal (0 - 0.29%) |
| Disposal | Excess product can be left to fully cure and disposed of in a bin. |
| Tool cleaning | After use wash tools in warm water immediately after use. |
| How to use | Stir the Polyfilla One Fill gently to a creamy consistency. Then applying straight from the pot, knife well into the repair, smooth and level with the surrounding surface, with a wet filling, angling surfaces to shed water |
| Surface preparation | To get the best results make sure surfaces are clean, dry, and free from all loose material. Touch in nails and screw heads with oil based primer. |