-Network manageable: Provides remote management of the UPS over the network. -Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. -Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced. -Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance -Serial Connectivity: Provides management of the UPS via a serial port. -LED status indicators: Quickly understand unit and power status with visual indicators. -InfraStruXure Manager compatible: Enables centralized management via the APC InfraStruXure® Manager. -Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery. -Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. -Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals. -Dataline Surge Protection: Provides protection of connected equipment from power surges on the data lines. -Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances. -Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging. -Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power. -Cold-start capable: Provides temporary battery power when the utility power is out. -Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. -Resettable circuit breakers: Enables a quick recovery from overload events. More information: Weight & dimensions | Weight | 12270 g | Battery | Battery technology | Sealed Lead Acid (VRLA) | | Typical backup time at full load | 5.5 min | | Typical backup time at half load | 15.7 min | | Battery recharge time | 5 h | | Hot-swap battery | Yes | Operational conditions | Operating temperature (T-T) | 0 - 40 °C | | Storage temperature (T-T) | -15 - 45 °C | | Operating relative humidity (H-H) | 0 - 95 % | | Storage relative humidity (H-H) | 0 - 95 % | | Operating altitude | 0 - 3000 m | | Non-operating altitude | 0 - 15000 m | Design | Product colour | Grey | | Cable length | 1.83 m | | LED indicators | Yes | | Certification | CSA,FCC Part 15 Class A,UL 1778 | Features | Output power capacity | 0.62 kVA | | Output power | 390 W | | Input frequency | 50/60 Hz | | Surge energy rating | 412 J | | Emergency Power Off (EPO) | Yes | | Noise level | 45 dB | | Audible alarm(s) | Yes | Other features | Interface | DB-9, RS-232 | | Output connections | (4) NEMA 5-15R | | Input connection type | NEMA 5-15P | | Dimensions (WxDxH) | 119 x 368 x 168 mm | | Nominal output voltage | 120 V | | Nominal input voltage | 120 V |
|