Wireless LAN Access Points for Small to Medium-Sized Networks The MWS1750AP wireless Access Point features IEEE802.11ac wave1 dual-band radio and embedded antennas. It supports three IEEE 802.11n/ac spatial streams, with throughput of 450Mbps in the 2.4GHz band and1.3Gbps in the 5GHz band. More information: Operational conditions | Operating relative humidity (H-H) | 5 - 90 % | | Operating temperature (T-T) | 0 - 50 °C | | Storage temperature (T-T) | -40 - 70 °C | | Storage relative humidity (H-H) | 5 - 95 % | Antenna | Antenna type | Internal | Weight & dimensions | Width | 161.2 mm | | Depth | 161.2 mm | | Height | 38 mm | | Weight | 340 g | Ports & interfaces | Ethernet LAN (RJ-45) ports | 1 | | DC-in jack | Yes | Security | Security algorithms | 64-bit WEP, 128-bit WEP, 152-bit WEP, 802.1x RADIUS, EAP-AKA, EAP-FAST, EAP-SIM, EAP-TLS, MSCHAPv2, PEAP, WPA, WPA-AES, WPA-TKIP, WPA2, WPA2-AES, WPA2-TKIP | | Service Set Identifier (SSID) features | SSID broadcast on/off | Management features | Syslog | Yes | Features | Maximum data transfer rate | 1000 Mbit/s | | Wi-Fi data rate (max) | 54 Mbit/s | | Ethernet LAN data rates | 10,100,1000 Mbit/s | | Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n | | Quality of Service (QoS) support | Yes | Power | Power over Ethernet (PoE) | Yes | | Power consumption (typical) | 11 W | | Heat dissipation | 37.92 BTU/h | Design | Placement | Ceiling, Table, Wall | | Product colour | White | | LED indicators | Yes |
|