Brodit 539672 holder Tablet/UMPC Grey

Holder with lock. 2 keys included. For device with Targus SafePORT Rugged Max Pro protective case. This holder is to be used when you want to secure your Dell Venue 8 Pro and still have it easy accessable. The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Dell Venue 8 Pro without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Dell Venue 8 Pro from the holder you need the key, two keys are included. Fits units both with and without handstrap. Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount. INSTALLATION INSTRUCTIONS: Please read all of the instructions and look at the pictures before attaching the holder. 1. Place the holder onto the desired position. Screw the holder into place with the enclosed screws. 2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. Push the lock downwards and press the button to lock. 3. To remove the device from the holder: Use the enclosed key to open the lock. Slide the locks upwards. Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder. 4. The holder is in place.