| |
|
| Item number: CIEN8-27131503 Manufacturer no.: SRT6KRMXLI-6W EAN/GTIN: 8592978053499 |
| |
|
| | |
| LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.
10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection
Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime Allows additional run time to be quickly added as needed.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Network manageable Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
SmartSlot Customize UPS capabilities with management cards.
LED status indicators Quickly understand unit and power status with visual indicators.
Serial connectivity Provides management of the UPS via a serial port.
Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Audible alarms Provides notification of changing utility power and UPS power conditions
Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable Provides temporary battery power when the utility power is out.
Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. More information: Weight & dimensions | Width | 432 mm | | Depth | 719 mm | | Height | 174 mm | | Weight | 60000 g | | Package width | 610 mm | | Package depth | 960 mm | | Package height | 370 mm | | Package weight | 67000 g | Battery | Battery technology | Sealed Lead Acid (VRLA) | | Battery capacity | 902 VAh | | Typical backup time at full load | 2.5 min | | Typical backup time at half load | 8.7 min | | Battery life (max) | 5 year(s) | | Battery recharge time | 1.5 h | | Hot-swap battery | Yes | | Automatic battery test | Yes | | Cold start | Yes | Technical details | Sustainability certificates | RoHS, ENERGY STAR | Operational conditions | Operating temperature (T-T) | 0 - 40 °C | | Storage temperature (T-T) | -15 - 45 °C | | Operating relative humidity (H-H) | 0 - 95 % | | Storage relative humidity (H-H) | 0 - 95 % | | Operating altitude | 0 - 3000 m | | Non-operating altitude | 0 - 15000 m | Logistics data | Harmonized System (HS) code | 85078000 | Design | Form factor | Rackmount | | Product colour | Black | | Rack capacity | 4U | | Display type | LCD | | LED indicators | Status | | International Protection (IP) code | IP20 | | Certification | REACH, CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE | Features | UPS topology | Double-conversion (Online) | | Output power capacity | 6 kVA | | Output power | 6000 W | | Waveform | Sine | | Input operation voltage (min) | 100 V | | Input operation voltage (max) | 275 V | | Input frequency | 40 - 70 Hz | | Output operation voltage (min) | 220 V | | Output operation voltage (max) | 240 V | | Output frequency regulation | 50/60 Hz | | Surge energy rating | 480 J | | Number of output phases | 1 | | Efficiency | 94.4 % | | Crest factor | 3:1 | | Emergency Power Off (EPO) | Yes | | Noise level | 55 dB | | Surge protection | Yes | | Audible alarm(s) | Yes | | Auto-restart | Yes | Packaging data | Rack mount kit | Yes | | Bracket | Yes | | Cables included | USB cable | | Temperature sensor | Yes | | Quick installation guide | Yes | | Warranty card | Yes | | Software CD | Yes | Ports & interfaces | AC outlet types | C13 coupler, C19 coupler | | Power plug | Terminal | | AC outlets quantity | 10 AC outlet(s) | | Number of output IEC jumpers | 2 | | USB port | Yes | | Serial interface | Yes | | SmartSlot | Yes |
|
| | |
| | | |
| Other search terms: UPS system, Uninterruptible power supply, UPS rack mounting kit, apc ups, cable bracket, 6kva ups, UPSs, uninterruptible power supply, uninterruptible power supplies, uninterruptible power source, uninterruptible power sources |
| | |
| |