|  |
| |
| Item number:
CIEN8-27131499 Manufacturer no.:
SMT3000R2I-6W EAN/GTIN:
8592978044701 |
| |
|
| | |
| StruxureWare Central compatible
Enables centralized management via StruxureWare Central.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Wide input voltage range
Designed for harsh electrical environments to save battery life.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
High online efficiency
Reduces utlility costs, generates less heat.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Cold-start capable
Provides temporary battery power when the utility power is out.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Network manageable
Provides remote power management of the UPS over the network.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serial connectivity
Provides management of the UPS via a serial port.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. More information: Weight & dimensions | Width | 480 mm | | Depth | 683 mm | | Height | 86 mm | | Weight | 44280 g | | Package width | 600 mm | | Package depth | 980 mm | | Package height | 254 mm | | Package weight | 51700 g | Battery | Battery technology | Sealed Lead Acid (VRLA) | | Battery capacity | 547 VAh | | Typical backup time at full load | 3.2 min | | Typical backup time at half load | 11.5 min | | Battery life (max) | 5 year(s) | | Battery recharge time | 3 h | | Hot-swap battery | Yes | | Automatic battery test | Yes | | Cold start | Yes | Technical details | Sustainability certificates | Green Premium, RoHS | Operational conditions | Operating temperature (T-T) | 0 - 40 °C | | Storage temperature (T-T) | -15 - 45 °C | | Operating relative humidity (H-H) | 0 - 95 % | | Storage relative humidity (H-H) | 0 - 95 % | | Operating altitude | 0 - 3000 m | | Non-operating altitude | 0 - 15000 m | Logistics data | Harmonized System (HS) code | 85078000 | Design | Form factor | Rackmount | | Product colour | Black | | Rack capacity | 2U | | Cable length | 2 m | | LED indicators | Status | | Certification | C-tick, CE, EN 60950, EN/IEC 62040-1-1, EN/IEC 62040-2, GOST, GS Mark, IRAM, VDE, WEEE, REACH | Features | UPS topology | Line-Interactive | | Output power capacity | 3 kVA | | Output power | 2700 W | | Waveform | Sine | | Input operation voltage (min) | 151 V | | Input operation voltage (max) | 302 V | | Input frequency | 50/60 Hz | | Output operation voltage (min) | 220 V | | Output operation voltage (max) | 240 V | | Automatic Voltage Regulation (AVR) | Yes | | Surge energy rating | 320 J | | Hold time (min) | 4 ms | | Hold time (max) | 8 ms | | Efficiency | 98.3 % | | Noise level | 55 dB | | Surge protection | Yes | | Audible alarm(s) | Yes | | Auto-restart | Yes | Packaging data | Rack mount kit | Yes | | Cables included | RS-232, USB cable | | Quick installation guide | Yes | | Software CD | Yes | Ports & interfaces | AC outlet types | C13 coupler, C19 coupler | | Power plug | C20 coupler | | AC outlets quantity | 9 AC outlet(s) | | Number of output IEC jumpers | 3 | | USB port | Yes | Other features | Nominal output voltage | 230 V | | Nominal input voltage | 230 V |
|
| | |
| | | |
| | | |
| |