|  |
| |
| Item number:
CIEN7-73561813 Manufacturer no.:
SSDPE2KE064T8 EAN/GTIN:
n/a |
| |
|
| | |
| Enhanced Power Loss Data Protection
Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.
Hardware Encryption
Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.
High Endurance Technology (HET)
High Endurance Technology (HET) in SSD's combines Intel® NAND Flash Memory silicon enhancements and SSD system management techniques to help extend the endurance of the SSD. Endurance is defined as the amount of data that can be written to an SSD during its lifetime.
Temperature Monitoring and Logging
Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.
End-to-End Data Protection
End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back. More information: Operational conditions | Operating temperature (T-T) | 0 - 55 °C | | Operating vibration | 2.17 G | | Non-operating vibration | 3.13 G | | Operating shock | 1000 G | | Non-operating shock | 100 G | Power | Power consumption (read) | 15 W | | Power consumption (write) | 15 W | | Power consumption (idle) | 5 W | Brand-specific features | Intel High Endurance Technology (HET) | Yes | Other features | Drive capacity | 6400 GB | | SSD endurance rating | 36.54PBW | | SSD hardware encryption | AES 256 bit | | SSD power consumption (active) | 15W | | SSD power consumption (idle) | 5W | | SSD shock | 1000G | | SSD weight | 139 g | | Sequential reading | 3200 MB/s | | Sequential writing speed | 3200 MB/s | | Status | Launched | | Product family | Data center SSD | | Product codename | Cliffdale Refresh | Features | SSD form factor | 2.5" | | SSD capacity | 6400 GB | | Interface | PCI Express 3.1 | | Memory type | 3D TLC NAND | | NVMe | Yes | | Component for | Server/workstation | | Hardware encryption | Yes | | Security algorithms | 256-bit AES | | Read speed | 3200 MB/s | | Write speed | 3200 MB/s | | Random read (4KB) | 654000 IOPS | | Random write (4KB) | 210500 IOPS | | Random read (100% span) | 654000 IOPS | | Random write (100% span) | 210500 IOPS | | Read latency | 95 µs | | Write latency | 20 µs | | End-to-End Data Protection | Yes | | Enhanced Power Loss Data Protection technology | Yes | | SSD temperature monitoring | Yes | | Uncorrectable Bit Error Rate (UBER) | < 1 per 10^17 bits read | | Mean time between failures (MTBF) | 2000000 h | | Market segment | Server | | SSD ARK ID | 140106 | Weight & dimensions | Width | 15 mm | | Weight | 139 g |
|
| | |
| | | |
| Other search terms: NVMe hard drive, SSD, SSDs, Solid-state drive, Solid-state drives, Solid-state disk, Solid-state disks, SSD drive, SSD disk, Solid State Disk, Solid State Disks, Solid State Drive, Solid State Drives, m2 hard disk, internal SSD, internal SSDs, internal solid-state disk, internal solid-state disks |
| | |
| |