Salicru's SPS ATS series is an automatic switch between two single-phase AC power lines which, starting from two sine-wave current power lines, supplies output voltage to the load(s). The switching can be automatic or manual. The LCD display and status LEDs continually report the status of the device, working mode and values of the main measurements. It has extensive communication possibilities through integrated USB, RS-232 and potential-free contact interfaces, or optional inclusion on an SNMP platform. In addition, by means of the parameter-setting software available, parameters such as delays, overload levels, voltage and frequency ranges, line sensitivity, potential-free contacts, etc., can be set. More information: Performance | Power protection features | Overload |  | Efficiency | 99 % | | LED indicators | Yes | Power | Input operation voltage (min) | 150 V | | Input operation voltage (max) | 300 V | | AC input frequency | 50 - 60 Hz | | Output operation voltage (min) | 200 V | | Output operation voltage (max) | 240 V | | Output current | 32 A | Weight & dimensions | Width | 438 mm | | Depth | 275 mm | | Height | 88 mm | | Weight | 6000 g | Design | Form factor | Rackmount | | Rack capacity | 2U | | Product colour | Black, Grey | | Display | LCD | | Safety | IEC-60950-1 | | Certification | EN-55022; EN-55024, ISO 9001 & ISO 14001 | Ports & interfaces | AC outlets quantity | 18 AC outlet(s) | | AC outlet types | C13 coupler, C19 coupler | | USB port | Yes | | RS-232 ports | 2 | | SmartSlot | Yes | Operational conditions | Operating temperature (T-T) | 0 - 40 °C | | Operating relative humidity (H-H) | 0 - 95 % |
|