The supply module provides the I/O modules with the corresponding supply potential.
The maximum current at the supply module is 6.3A. When configuring the system, it must be ensured that this total current is not exceeded. Should higher currents be necessary, intermediate supply modules must be added in the assembly.
This module is fuse-protected (5 x 20mm). The fuse can be changed quickly, with ease, from the retractable fuse carrier.
A blown fuse and the status of the supply voltage are indicated via LEDs.
The I/O module sends information about the status of the supply module to the fieldbus coupler through two input bits. One bit is for the status of the fuse. The other bit is for the status of the supply voltage. More information: Weight & dimensions | Width | 12 mm | | Depth | 100 mm | | Height | 69.8 mm | | Weight | 51 g | Operational conditions | Operating temperature (T-T) | -25 - 85 °C | | Operating relative humidity (H-H) | 0 - 95 % | Power | Current consumption (internal) | 5 mA | | Output current | 6.3 A | Features | Product colour | Grey | | Mounting type | DIN 35 × 15 | | Internal bit width | 2 bit | | Fire load | 1.488 MJ | | AWG wire size (max) | 14 | | AWG wire size (min) | 28 | | Conductor area (min) | 0.08 mm² | | Conductor area (max) | 2.5 mm² | | Wire clamp type | Cage clamp | | International Protection (IP) code | IP20 | | Shock-resistant | Yes | | Vibration resistant | Yes | Technical details | Compliance certificates | RoHS |
|