Cuprinol Anti Slip Decking Stain Amer/Mahog 2.5 L

Features

Suitable for outdoor use

Yes

Best uses

Decking

Volume

2.5 L

Surface coverage

8 m²/L

Colour name

Amer/Mahog

Composition

Water-based

Opacity

Translucent

Number of coats (min)

2

Number of coats (max)

3

Minimum drying time

2 h

Maximum drying time

6 h

Drying time note

Dependent on the nature of the surface and the weather conditions

Recoat after

2 h

Recoat after (min)

6 h

Recoat after (max)

6 h

Tool cleaning

Remove as much stain as possible from brushes and rollers before cleaning with water

Disposal

Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk

How to use

Stir thoroughly before use. Final colour will depend upon wood type, previous treatment and the number of coats applied. Apply 2-3 coats evenly along the grain, avoiding overlaps. When applying subsequent coats, allow each coat to dry fully before recoating. Avoid heavy wear and tear for a few days after application. On previously stained decking, touch up bare areas and allow to dry before finishing with further coats. Do not apply in temperatures below 5C, in damp conditions or if rain is likely before the product has dried. If using more than one can it is advisable to mix them together in a larger container or finish in a corner before starting a new can.

How to store

Do not use or store in extremes of temperature or wet conditions

Surface preparation

Timber specifically sold as decking is normally pretreated with wood preserver to prevent decay. Ensure timber used in ground contact has been pre-treated or sold specifically for use as decking. Surfaces should be clean, dry and free from algae and mould. For best results brush to remove dirt and debris and then clean the surface with Cuprinol Decking Cleaner. Rinse well and allow to dry. Resinous or oily wood may affect performance. New wood: Wipe with white spirit to remove any natural oils/resins. Weathered wood: Completely remove all grey wood by sanding back or using Cuprinol Decking Restorer. Painted or varnished wood: Sand off or chemically strip existing coatings then treat as bare wood. Previously treated wood: Wash with Cuprinol Decking Cleaner and water to remove dirt and grease and allow to dry.

Logistics data

Layers per pallet

6 pc(s)

Packaging data

Package width

157 mm

Package depth

157 mm

Package height

157 mm

Package weight

2880 g