Zalman Z3 Iceberg White Midi Tower

Zalman Z3 Iceberg White ATX Middle tower computer case white Minimalistic Design A minimalistic design inspired by a glacier and its minimal lines Aesthetic and Functional Elegant front design inspired by the glacier ensures a smooth airflow as well as aesthetic Maximum Airflow and Ventilation 2 pre-installed 120mm ARGB fans (Front x 1, Rear x 1) and optimized ventilation provide quick heat dissipation from the case (Up to 8 fans can be supported) Supports Addressable RGB ※ How to control RGB LED - LED colors & patterns can be changed by pressing the LED Button on I/O ports. - Long pressing on the LED Button for 6 seconds, RGB LED will be turn off after blinking twice in white. - Long pressing on the LED Button for 3 seconds, RGB will be synchronized with motherboard after blinking once in white. - Press the LED Button again to desynchronize with motherboard. Fan Specifications (Addressable RGB LED Fan) • Dimensions : 120 x 120 x 25(T)mm • Bearing Type : Hydro Bearing • Max Fan Speed : 1,200 RPM ±10% • Max Airflow : 37.8 CFM • Air Pressure : 0.7mm H2O • Noise Level : 26.4 dB(A) • Life Span : 40,000 hours Easy-to-use Slide Glass Side Panel & Tempered Glass A thick 4mm tempered glass panel allows for easy viewing of the internal computer components. The tempered glass side panel is protected utilizing an edge guard ensures the tempered glass panel will not slide out of proper placement during installation and removal. This edge guard protects the glass and makes it relatively vulnerable to impact and allows for access with removal of only 2 hand tightened screws. Easy accessible design on top I/O ports Z3 ICEBERG comes with two USB3.0 ports and its I/O port is placed on the right side of the chassis to provide great experience on cable management. Power Button(LED), Reset Button, LED Control Button, Headphone Jack, Microphone Jack, USB2.0 Port, USB3.0 Ports Cable-Management-Friendly Chassis Carefully designed chassis to minimize cable management difficulties * Upper I/O port is on the right side with rubber covers applied to unused holes for cable management Top Magnetic Dust Filter Protects your components and provides unobstructed airflow through dust filtration Bottom Dust Filter Protects your power supply from piling up dust Fan Support Front : 3 x 120mm / 3 x 140mm Top : 2 x 120mm / 2 x 140mm Rear : 1 x 120mm Bottom : 2 x 120mm Radiator Configuration Front : 120mm / 240mm / 280mm / 360mm Top : 120mm / 240mm Rear : 120mm Specifications Model: Z3 Iceberg White Materials: Steel, Plastic, Tempered Glass Weight: 6.4kg Dimensions: 410(D) x 210(W) x 480(H)mm Case Form Factor: ATX Mid-Tower Motherboard Support: E-ATX (~280mm), ATX, mATX, Mini-ITX Fans Support: Front 3 x 120mm / 3 x 140mm, Top 2 x 120mm / 2 x 140mm, Rear 1 x 120mm Fan(s) Included: Front 1 x 120mm (Addressable RGB), Rear 1 x 120mm (Addressable RGB) ARGB Controller Included Drive Bays: 2 x 3.5” (2 x Combo, 1 x Toolless), 4 x 2.5” Radiator Support: Front 120mm / 240mm / 280mm / 360mm, Top 120mm / 240mm, Rear 120mm Max. VGA Length: 315mm Max. CPU Cooler Height: 163mm Max. PSU Length: 210mm PCI Expansion Slots: 7 I/O Ports: 1 x Headphone, 1 x Mic, 1 x USB 2.0, 2 x USB 3.0, Power Button, Reset Button, LED Button Product code: Z3 Iceberg White