The UP-COAX-TX/RX series devices transmit 10/100Mbps Ethernet and PoE/PoE+ with coaxial cable up to a distance of 300m. The devices are supplied and used in pairs, the UP-COAX-TX on the camera side and the UP-COAX-RX on the server side. The extenders make it possible to pass on the PoE supply, e.g. of a midspan, directly via coaxial cable. Power is supplied exclusively via PoE, i.e. even if the camera does not require PoE, a PoE injector, midspan or switch must be used at the beginning of the line. The devices do not require any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the UP-COAX-TX/RX series are designed as table-top models. Several units can be joined together laterally. More information: Weight & dimensions | Width | 113 mm | | Depth | 46 mm | | Height | 29 mm | | Weight | 100 g | Power | Power over Ethernet (PoE) | Yes | Operational conditions | Operating temperature (T-T) | -10 - 55 °C | Network | Cabling technology | 10/100Base-T(X) | | Networking standards | IEEE 802.3,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x | Ports & interfaces | RJ-45 ports quantity (transmitter) | 1 | | RJ-45 ports quantity (receiver) | 1 | Design | Product colour | Black | | LED indicators | Yes | Performance | Type | Network transmitter & receiver | | Maximum transfer distance | 300 m | | Data transfer rate | 100 Mbit/s | | Ethernet LAN data rates | 10,100 Mbit/s | | Duplex system | Full | | Flow control support | Yes |
|