|  |
| |
| Item number:
CIEN4-13061479 Manufacturer no.:
JG236-61001 EAN/GTIN:
n/a |
| |
|
| | |
| The HP 5120 EI Switch Series is comprised of Gigabit Ethernet switches that support static Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide up to four 10-Gigabit Ethernet (10 GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers. High scalability provides investment protection with two expansion slots, each of which can support two-port 10 GbE expansion modules. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Management
• Friendly port names: allows assignment of descriptive names to ports
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Performance
• Nonblocking architecture: up to 192 Gbps nonblocking switching fabric provides wire-speed switching with up to 143 million pps throughput
Resiliency and high availability
• Separate data and control paths: separates control from services and keeps service processing isolated; increases security and performance
Layer 2 switching
• 16K MAC address table: provides access to many Layer 2 devices
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network More information: Security | DHCP features | DHCP client | | Access Control List (ACL) | Yes | | IGMP snooping | Yes | | SSH/SSL support | Yes | Power over Ethernet (PoE) | Power over Ethernet (PoE) | Yes | | Total Power over Ethernet (PoE) budget | 370 W | Design | Rack mounting | Yes | | Stackable | Yes | | Form factor | 1U | | Product colour | Black | Multicast features | Multicast support | Yes | Management features | Switch type | Managed | | Switch layer | L3 | | Quality of Service (QoS) support | Yes | | Web-based management | Yes | Performance | Expansion module support | Yes | | Memory type | SDRAM | | Internal memory | 128 MB | | Flash memory | 16 MB | Weight & dimensions | Width | 439.9 mm | | Depth | 420.1 mm | | Height | 43.7 mm | | Weight | 7000 g | Operational conditions | Heat dissipation | 425 BTU/h | Power | AC input voltage | 100 - 240 V | | AC input frequency | 50 - 60 Hz | | Power consumption (typical) | 495 W | Data transmission | Switching capacity | 144 Gbit/s | | Throughput | 107.2 Mpps | | Latency (1 Gbps) | 3.2 µs | | Latency (10 Gbps) | 2.6 µs | | Packet buffer memory | 2 MB | Network | Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u | | Port mirroring | Yes | | Full duplex | Yes | | Routing entries | 32 | | Flow control support | Yes | | Link aggregation | Yes | | Broadcast storm control | Yes | | Spanning tree protocol | Yes | | Auto-sensing | Yes | | VLAN support | Yes | Ports & interfaces | Basic switching RJ-45 Ethernet ports quantity | 24 | | Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) | | Combo SFP ports quantity | 4 | | Console port | RJ-45 |
|
| | |
| | | |
| Other search terms: poe switch, switch, switches, ethernet switch, ethernet switches, network switch, network switches, switching hub, switching hubs, bridging hub, bridging hubs, MAC bridge, MAC bridges, managed switch, managed switches, unmanaged switch, unmanaged switches, LAN, Local Area Network |
| | |
| |