This media and rate converter line card features a 10/100/1000T twisted pair port and an optical SFP port. The twisted pair has an RJ-45 connector and a maximum operating distance of 100 meters (328 feet) when connected to an Ethernet or Fast Ethernet or Gigabit Ethernet device. They operate in full or half-duplex mode, and allow you to build an affordable network, avoiding the cost of terminatiang fiber cables. The AT-CM3K0S has a SFP port supporting both Fast Ethernet and Gigabit operation, allowing a choice of multi/single mode, dual/single fiber SFP modules. - Converts speed as well as media type - Extends Ethernet and Fast Ethernet and Gigabit Ethernet networks - Supports IEEE 802.3ah ‘Ethernet in the First Mile’ - Support MissingLink™ and Smart MissingLink™ - Transparent to IEEE 802.1Q VLAN packets - Jumbo Frame Support - Rate Limiting - Low Power Mode - Supports Dying Gasp - Automatic address learning and aging - Managed, or Unmanaged operation - Auto MDI/MDI-X - Auto-Negotiation (IEEE 802.3u-compliant) - Store and forward data packet handling - Supports 100 and 1000Mbps SFPs - System and port LEDs - Line card for all Converteon™ series chassis - Limited lifetime warranty More information: Other features | Dimensions (WxDxH) | 22 x 73 x 130 mm |  | MAC address table | 1000 entries | | Packet transfer speed | 14880, 148800, 1488000 pps | | Full duplex | Yes | Operational conditions | Operating temperature (T-T) | 0 - 40 °C | | Storage temperature (T-T) | -25 - 70 °C | | Operating relative humidity (H-H) | 5 - 95 % | | Storage relative humidity (H-H) | 5 - 95 % | | Operating altitude | 0 - 3048 m | Power | Power consumption (typical) | 6 W | Performance | Mean time between failures (MTBF) | 1530000 h | Ports & interfaces | Connectivity technology | Wired | Logistics data | Harmonized System (HS) code | 85176990 | Weight & dimensions | Weight | 113 g | Network | Maximum data transfer rate | 1000 Mbit/s | | Cabling technology | 10/100/1000T |
|