This Lindy Media Converter extends the connection between two network devices at distances up to 550m using multimode fibre optic cables. The installation is plug-and-play and the user only has to connect to the RJ45 port with a Cat.5e or above Ethernet cable and the fibre port with a SC Multimode 50/125 or 62.5/125 Duplex fibre optic cable. No configuration needed, easily integrated into any existing Ethernet network and supports Full/Half duplex mode and auto-negotiation on both ports. The Media Converter can operate with 100 or 1000Mbps network speed, it also provides status LEDs to indicate data link, speed, Full/Half Duplex and link failure. Supports IEEE 802.3 standard and Jumbo frames up to 9K. More information: Packaging data | Package width | 165 mm |  | Package depth | 155 mm | | Package height | 45 mm | | Package weight | 650 g | Design | LED indicators | Yes | | Product colour | Black | | Certification | CE, UKCA, FCC, RoHS, REACH & California Proposition 65 | Operational conditions | Operating temperature (T-T) | 0 - 40 °C | | Storage temperature (T-T) | -10 - 70 °C | | Operating relative humidity (H-H) | 5 - 95 % | Power | Output voltage | 5 V | | Output current | 1 A | Performance | Maximum transfer distance | 550 m | | Wavelength | 850 nm | | Fiber mode structure | Multi-mode | | Fiber cable diameters supported (core/cladding) | 50/125,62.5/125 µm | Ports & interfaces | Fiber optic connector | SC | | Connectivity technology | Wired | | Ethernet LAN (RJ-45) ports | 1 | | Fiber ports quantity | 2 | Weight & dimensions | Width | 95 mm | | Depth | 70 mm | | Height | 25 mm | | Weight | 540 g | Network | Networking standards | IEEE 802.3 | | Ethernet LAN data rates | 10,100,1000 Mbit/s | | Duplex system | Full, Half |
|