Convert and extend a 10/100 Mbps Ethernet connection up to 2 km over Multi Mode ST fiber
The MCM110ST2 10/100 Multi Mode ST Fiber Ethernet Media Converter (2 km) creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone.
The ST media converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance and scalability.
Easy to setup and install, this compact, value-conscious fast Ethernet media converter features auto-switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, Full and Half Duplex, as well as LFP (Link Fault pass-through) on/off.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Improve network scalability by increasing the distances between network points by up to 2km (Multi-mode)
- Compact, lightweight enclosure is easily mounted or placed into any location with little to no configuration needed
- Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion More information: Packaging data | Package width | 145 mm |  | Package depth | 175 mm | | Package height | 61 mm | | Package weight | 273 g | Design | LED indicators | Yes | | Housing material | Plastic | | Certification | CE, FCC, TAA, REACH | Operational conditions | Operating temperature (T-T) | 0 - 50 °C | | Storage temperature (T-T) | -10 - 70 °C | | Operating relative humidity (H-H) | 10 - 90 % | Power | Input voltage | 100 - 240 V | | Output voltage | 12 V | | Output current | 0.2 A | | Power consumption (typical) | 2.4 W | | Power plug type | Type M | Performance | Maximum transfer distance | 2000 m | | Wavelength | 1310 nm | | Sensitivity | -31 dBmW | | Link budget | 11 dB | | Mean time between failures (MTBF) | 65000 h | Ports & interfaces | Fiber optic connector | ST | | Connectivity technology | Wired | | Ethernet LAN (RJ-45) ports | 1 | Weight & dimensions | Width | 75 mm | | Depth | 95 mm | | Height | 20 mm | | Weight | 82 g | Technical details | Sustainability certificates | RoHS | Network | Maximum data transfer rate | 100 Mbit/s | | Converter input interface | 10Base-T, 100BASE-FX, 100Base-TX | | Networking standards | IEEE 802.3, IEEE 802.3u | | Ethernet LAN data rates | 10,100 Mbit/s | | Data transfer rate | 100 Mbit/s | | Duplex system | Full, Half | Packaging content | AC adapter included | Yes | | Manual | Yes |
|