FLIR CM275 Industrial Thermal Imaging Clamp Meter with Data Logging, Wireless Connectivity and IGM, Black, 0 Built-in display 160 x 120 pixels TFT

The FLIR CM275 thermal imaging digital clamp multimeter is a clamp meter equipped with a thermal imaging module, allowing you to quickly identify problems that cannot be detected with a standard clamp meter. Using Infrared Guided Measurement (IGM) technology, the CM275 visually pinpoints the exact location of a potential electrical problem, safely identifying hazards and as yet unrecognized problems. The observations made can be confirmed by using an accurate measurement of the current and voltage, and a temperature reading at the center of the display. Narrow clamps facilitate access, and, thanks to the small size of the device, you can carry it, for example, in the back pocket of trousers to use thermal imaging literally everywhere. The FLIR CM275 is an indispensable tool for identifying and solving electrical problems. The CM275 uses a unique Bluetooth® interface that enables wireless data transmission by connecting to the FLIR Tools ™ application. The CM275 is also compatible with the new FLIR InSite ™ workflow management tool for optimized inspection routing, accurate documentation, customer information sharing and instant reporting. Identify problems faster with IGM - Visually identify electrical installation problems thanks to the clamp meter with thermovision function. - Control over high-density cords and cables - IGM quickly guides you in the right direction - Integrated tool - with one device you always have access to thermal imaging - Exact localization of faults thanks to the thermal imaging module with a resolution of 160x120 - Safe operation - control of hazards in a panel or cabinet using the IGM function without the need for direct contact Identify problems faster with IGM - Visually identify electrical installation problems thanks to the clamp meter with thermovision function. - Control over high-density cords and cables - IGM quickly guides you in the right direction - Integrated tool - with one device you always have access to thermal imaging - Exact localization of faults thanks to the thermal imaging module with a resolution of 160x120 - Safe operation - control of hazards in a panel or cabinet using the IGM function without the need for direct contact Confirming observations - Checking for problems, loads and hot spots. - Temperature measurement in the center of the field of view to confirm hot spots - Current and voltage measurement to check the load - Precise localization of problems in the thermal image thanks to the laser pointer and crosshair Solving complex electrical problems - Design and functionality tailored to the needs of specialists. - Narrow clamps and built-in lighting facilitate access to difficult places where there is not enough light - Advanced electrical functions: True RMS, LoZ, VFD mode, starting, smart diode with switch-off (measurement of true effective value, measurement at low impedance, mode for devices for frequency regulation of the rotational speed of asynchronous motors, inrush current measurement, diode measurement without changing connections with the option to turn off the function) - Quick battery replacement thanks to the "no tool" compartment - Robust device with proven drop resistance and 10-year warranty - Expandable to 3000A AC range using FLIR Flex accessories Preparation and sharing of documentation - The ability to store data and share wirelessly improves work. - Streamlined auditing and simplified collection, sharing and reporting with wireless connection to FLIR Tools ™ or FLIR InSite ™ - Built-in memory allows you to save electrical parameters and thermal images Technical specification Thermovision - Image resolution: 19200px (160x120) - Imaging detector: FLIR Lepton® microbolometer - Thermal sensitivity (MRTD): ≤150mK - Emissivity: 4 adjustable presets - Accuracy: ± 3 ° C or ± 3.5% - Measurement range: -10 ° C to 150 ° C (14 ° F to 302 ° F) - Image sharpness: fixed focus - Field of view: HFOV (horizontal) 50 °, VFOV (vertical) 38.6 ° - Infrared spectrum range: from 8μm to 14μm - Image refresh rate: 9Hz - Temperature measurement: focal point of the infrared image - The ratio of the distance of the instrument to the diameter of the temperature measuring spot: 30: 1 - Temperature measurement point location: Class 1 laser pointer and crosshairs on the display - Color palettes: iron, rainbow and shades of gray Measurement functions - True RMS measurement - Automatic range selection with the option of manual adjustment - Voltage AC / DC V: 1000V ± 1.0%, VFD AC V: 1000V ± 1.0%, AC / DC LoZ V: 1000V ± 1.0% - AC / DC A current: 600.0A ± 2.0%, VFD AC A: 600.0A ± 2.0%, Starting AC A: 600.0A ± 3.0% - AC inrush current limit: min. 0.5A, integration time 100ms - Resistance: 6000Ω ± 1.0% - Capacity: 1000μF ± 1.0% - Diode test: 1.5V ± 1.5% - Frequency range: 60.00kHz ± 0.1% - Continuity check threshold: from 30Ω to 150Ω - Min / Max function - Measurement speed: 3 samples per second General Information - Maximum clamping opening: 35mm, 1250MCM - Drop resistance: 2m - Lighting: LED lights - Display: 2.4 "TFT - Data logging and storage: 10 sets of 40K scalar measurements, 100 images - Data transmission: Bluetooth® - Power supply: 3x AA batteries (included) or optional TA04 Li-Poly battery (not included) - Automatic shutdown - Safety category classification: CAT III 1000V, CAT IV 600V - Warranty: 10 years (product and detector) - Product dimensions: 255x97x48.5mm - Product weight: 460g - Package dimensions: 330x140x120mm - Package weight: 1040g Composition of the kit - FLIR CM275 clamp multimeter - Silicone insulated measuring tips - 3x AA batteries - Convenient case - Shortened multilingual instruction manual in printed version (including in Polish) - Extended warranty registration card