DIGITUS 2 Port Gigabit 4PPoE Extender, 802.3at, 60 W purchased inexpensively from Mercateo

2 Port Gigabit 4PPoE Extender, 802.3at, 60 W

Extends the range of your PoE network by up to 100 m

Benefits:

Supports 1 / 2 ports with PoE+, PoE
Transmits data and power via a network cable to your (PoE) network devices
No additional power adaptor required
Automatic detection of PoE network devices
Easy plug-and-play installation
Full bandwidth over the entire PoE distance

The DIGITUS® Gigabit 4PPoE Extender supports the latest networking technology to extend your Ethernet signal to up to 100 metres. The amplifier is powered by 4PPoE (4-Pair Power over Ethernet or lower), so you do not need an additional power adaptor and can use the device, even where there are no power cables or sockets, to significantly increase the network range. With the PoE+ and 4PPoE support, you can also connect devices with higher power consumption, such as access points, POS systems or video telephones. Choose future-orientated 4PPoE technology with the Gigabit 4PPoE Extender from DIGITUS®.

Technical data:

PoE inputs: 1x 10/100/1000Base-T RJ45
PoE outputs: 2x 10/100/1000Base-T RJ45
PoE input voltage: 50 – 57 V/DC, up to 60 W (max. class 5 - 4PPoE)
PoE output voltage: 44 – 57 V/DC, up to 30 W per port, max. 60 W
PoE power budget: 45 W @ IEEE 802.3at for 4PPoE input
PoE power budget: 20 W @ IEEE 802.3at for PoE+ input
PoE power budget: 10 W @ IEEE 802.3af for PoE input
PoE input PIN assignment: 1/2 (-), 3/6 (+), 7/8 (-), 4/5 (+)
PoE output PIN assignment: 1/2 (-), 3/6 (+)
Meets the following standards: IEEE802.3af (PoE), IEEE802.3at (PoE+), IEEE802.3at (4PPoE)
LED indicators: PoE active / link active
Recommended network cables: CAT 5e or higher
Max. forwarding rate: 1.488 Mpps per port / 7.44 Mpps total
Switch architecture: Store and forward
MAC addresses: 2K
Backplane bandwidth: 6 Gbps
Buffer: 2 Mbps
IEEE 802.3x full-duplex flow control
Operation temperature: 0 °C – 40°C
Operating humidity: max. 90% (non-condensing)
Industrial usage: false