Convert and extend a 10/100 Mbps Ethernet connection up to 2 km over Multi Mode ST fiber
The MCM110ST2 10/100 Multi Mode ST Fiber Ethernet Media Converter (2 km) creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone.
The ST media converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance and scalability.
Easy to setup and install, this compact, value-conscious fast Ethernet media converter features auto-switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, Full and Half Duplex, as well as LFP (Link Fault pass-through) on/off.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Improve network scalability by increasing the distances between network points by up to 2km (Multi-mode)
- Compact, lightweight enclosure is easily mounted or placed into any location with little to no configuration needed
- Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion More information:  | | Package width: | 145 mm | Package depth: | 175 mm | Package height: | 61 mm | Package weight: | 273 g | LED indicators: | Yes | Housing material: | Plastic | Certification: | CE, FCC, TAA, REACH | Operating temperature (T-T): | 0 - 50 °C | Storage temperature (T-T): | -10 - 70 °C | Operating relative humidity (H-H): | 10 - 90 % | Input voltage: | 100 - 240 V | Output voltage: | 12 V | Output current: | 0.2 A | Power consumption (typical): | 2.4 W | Power plug type: | Type M | Maximum transfer distance: | 2000 m | Wavelength: | 1310 nm | Sensitivity: | -31 dBmW | Link budget: | 11 dB | Mean time between failures (MTBF): | 65000 h | Fiber optic connector: | ST | Connectivity technology: | Wired | Ethernet LAN (RJ-45) ports: | 1 | Width: | 75 mm | Depth: | 95 mm | Height: | 20 mm | Weight: | 82 g | Sustainability certificates: | RoHS | Maximum data transfer rate: | 100 Mbit/s | Converter input interface: | 10Base-T, 100BASE-FX, 100Base-TX | Networking standards: | IEEE 802.3, IEEE 802.3u | Ethernet LAN data rates: | 10,100 Mbit/s | Data transfer rate: | 100 Mbit/s | Duplex system: | Full, Half | AC adapter included: | Yes | Manual: | Yes |
|