Cisco MDS 9132T - Switch - Managed - 24 x 32Gb Fibre Channel SFP+ - rack-mountable More information: General | Features | Auto-sensing per device, ARP support, LDAP support, Syslog support, ACL support, QoS, RSCN support, port exhaust, Automated Attendant (IVR), 4 fans, ISSU, built-in ASIC, FCS, Cisco ISL, RBAC, TrustSec support, POST, AAA, RDP, VMID support, SPAN |  | Device Type | Switch - Managed | | Enclosure Type | Rack-mountable 1U | | Status Indicators | Power, system, fan | | Remote Management Protocol | SNMP, RMON, SNMP 3, HTTPS, SMI-S, SSH-2, SFTP | | Encryption Algorithm | AES | | Routing Protocol | VRRP | | Authentication Method | RADIUS, TACACS+, LDAP | | Fibre Channel | FC-DA, FC-FLA, FC-FS, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-SP, FCP-4, FC-BB-2, FCP, FCP-2, FC-PI-2, FC-BB-5, FC-BB-3, FC-FS-2, FC-GS-5, FC-SW-4, FCP-3, FC-LS, FC-MI-2, FC-PI-4, FC-FS-3, FC-GS-6, FC-PI-3, FC-SW-5, FC-BB-4, FC-IFR, FAIS, FAIS-2, FC-PI-5, FC-LS-2, FC-SP-2, FC-SB-4, FC-DA-2, FC-MI-3, FC-MSQS, FC-BB-6, FC-SB-5, FC-GS-7, FC-LS-3 | | Ports | 24 x 32Gb Fibre Channel SFP+ | | Subtype | Fibre Channel | Expansion / Connectivity | Interfaces | 24 x 32Gb Fibre Channel SFP+ LC multi-mode x 2 ¦ 1 x console RJ-45 ¦ 1 x USB Type A ¦ 2 x management (Gigabit LAN) RJ-45 | | Expansion Slots | 1 (total) / 1 (free) x Expansion Slot | Manufacturer Warranty | Service & Support | Limited warranty - advance hardware replacement - 1 year - response time: 10 days | Miscellaneous | Compliant Standards | CISPR 22 Class A, EN 60950, EN 61000-3-2, IEC 60950, EN 61000-3-3, EN55024, UL 60950, EN50082-1, EN 61000-6-1, AS/NZS 3260, EMC, ICES-003 Class A, EN 60825, FCC Part 15 A, AS/NZS 3548 Class A, IEC 60825, CAN/CSA C22.2 No. 60950, VCCI Class A, EN 55022 Class A, 21 CFR 1040, TS001 | | Included Accessories | 4 fan trays | Power | Features | 80 PLUS Platinum efficiency, port side exhaust | | Power Device | Internal power supply - hot-plug | | Voltage Required | AC 120/230 V (50 - 60 Hz) | | Installed Qty | 2 | | Max Supported Qty | 2 | | Power Provided | 650 Watt | | Power Redundancy | Yes | Environmental Parameters | Min Operating Temperature | 0 °C | | Max Operating Temperature | 45 °C | | Humidity Range Operating | 10 - 90% (non-condensing) | | Min Storage Temperature | -40 °C | | Max Storage Temperature | 70 °C | | Humidity Range Storage | 10 - 95% (non-condensing) | Dimensions & Weight | Width | 4.37 cm | | Depth | 43.9 cm | | Height | 51.1 cm |
|