HPE Aruba 6200M 48G 4SFP+ Switch - Switch - Max. Stacking Distance 10 kms - L3 - Managed - 48 x 10/100/1000 + 4 x 1 Gigabit / 10 Gigabit SFP+ (uplink / stacking) - front and sid...

General

Features

Layer 2 switching, ARP support, DiffServ support, Virtual Route Redundancy Protocol (VRRP) support, Quality of Service (QoS), Trusted Platform Module (TPM), Equal-Cost Multipath (ECMP), Uni-Directional Link Detection (UDLD), Deficit Weighted Round Robin (DWRR), Management Information Base (MIB), Class of Service (CoS), Type of Service (ToS), Bridge protocol data unit (BPDU), Source-Specific Multicast (SSM), Network Timing Protocol (NTP), security slot (Kensington security lock compatible), Rapid PVST+ (RPVST+), DNS support, IGMP support, Unidirectional Link Detection (UDLD), Automatic Media-Dependent Interface Crossover (MDIX), web GUI management portal, Unsupported Transceiver Mode (UTM), Egress Queue Shaping (EQS)

Processor

1 x ARM: 1.8 GHz

Compliant Standards

IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ab (LLDP)

Device Type

Switch - 48 ports - L3 - Managed - stackable

Enclosure Type

Front and side to back rack-mountable 1U

Remote Management Protocol

SNMP, SNMP 3, SNMP 2c, CLI

RAM

8 GB DDR4 SDRAM

Capacity

Switched virtual interfaces (SVIs): 128 ¦ IPv4 host table capacity: 8000 ¦ IPv6 host table capacity: 8000 ¦ IPv4 routes (Unicast): 2000 ¦ IPv6 routes (Unicast): 2000 ¦ IGMP groups: 1000 ¦ MLD groups: 1000 ¦ IPv4 ACL entries (ingress): 1000 ¦ IPv6 ACL entries (ingress): 1000 ¦ MAC ACL entries (ingress): 1000 ¦ IPv4 ACL entries (egress): 512 ¦ IPv6 ACL entries (egress): 256 ¦ MAC ACL entries (egress): 512

Flash Memory

16 GB

MAC Address Table Size

16000 entries

Encryption Algorithm

MD5, SSL, FIPS 140-2

Routing Protocol

OSPF, RIP-2, OSPFv2, OSPFv3, ECMP

Authentication Method

RADIUS, TACACS+

Performance

Switching capacity: 176 Gbps ¦ Throughput: 130.9 Mpps ¦ Latency (1 Gbps): 2.28 µs ¦ Latency (10 Gbps): 1.46 µs ¦ Packet buffer size: 8 MB ¦ Stacking bandwidth: 40 Gbps

Max Units In A Stack

8

Ports

48 x 10/100/1000 + 4 x 1 Gigabit / 10 Gigabit SFP+ (uplink / stacking)

Jumbo Frame Support

9220 bytes

Subtype

Gigabit Ethernet

Expansion / Connectivity

Interfaces

48 x 10/100/1000 Base-T RJ-45 ¦ 4 x 1/10Gbit LAN SFP+ 2x LRM; 2x LRM/MACSec 256 ¦ 1 x console RJ-45 ¦ 1 x management RJ-45 ¦ 1 x console (USB) Type C ¦ 1 x USB Type A host

Manufacturer Warranty

Service & Support

Limited warranty - lifetime

Miscellaneous

Compliant Standards

EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 61000-3-3, ICES-003 Class A, RoHS, Laser Class 1, WEEE, VCCI Class A, IEC 60950-1:2005 + A1:2009 + A2:2013, CISPR 35, EN 60825-1:2014, EN 61000-3-2:2019, IEC 60825-1:2014 Class 1, UL 62368-1 Third Edition, EN 61000-3-3:2013/A1:2019, IEC 62368-1:2018 Third Edition, EN 55035:2017+A11:2020, EN 62368-1:2014+A11:2017 2nd Ed., EN 62368-1:2020+A11:2020 3rd Ed., BS EN 62368-1:2014 + A11:2017 2nd Ed, BS EN 62368-1:2020 + A11:2020 3rd Ed, IEC 62368-1:2014 2nd Ed, CNS 15598-1:2020, CISPR 32 Ed 2.1: 2019 Class A, CISPR 35 Ed 1.0:2016, CSA 22.2 No.62368-1 Third Edition, EN 55032:2015 + A11:2020 Class A, FCC 47 CFR part 15B:2014 Class A

Pricing Type

BTO

Included Accessories

Rack kit (2 post), fan tray (field replaceable, hotswappable)

Power

Power Device

Internal power supply (not installed)

Voltage Required

AC 100-120/200-240 V (50/60 Hz)

Power Consumption Operational

75 Watt

Max Supported Qty

2

Power Consumption Stand by

56 Watt

Software / System Requirements

OS Required

AOS-CX

Environmental Parameters

Min Operating Temperature

0 °C

Max Operating Temperature

45 °C

Humidity Range Operating

15 - 95% (non-condensing)

Min Storage Temperature

-40 °C

Max Storage Temperature

70 °C

Humidity Range Storage

15 - 90% (non-condensing)

Dimensions & Weight

Width

44.2 cm

Depth

38.5 cm

Height

4.4 cm

Weight

5.73 kg