D-Link DXS 3610-54T - Switch - L3 - Managed - 48 x 1 Gigabit / 10 Gigabit Ethernet + 6 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28 - front to back airflow - rack-mountable More information: General | Features | DoS attack prevention, SNTP support, sFlow, DHCP snooping, Quality of Service (QoS), MPLS VPN, LLDP support, DNS relay, Virtual Routing and Forwarding (VRF), Neighbor Discovery Protocol (NDP), Virtual Circuit Connectivity Verification (VCCV), Generic VLAN Registration Protocol (GVRP), SNMP support, Generic Routing Encapsulation (GRE), Type of Service (ToS), DiffServ Code Point (DSCP) support, Ethernet Ring Protection Switching (ERPS), MACsec support, 5 fans, OpenFlow support, Virtual Private LAN Service (VPLS), Priority-Based Flow Control (PFC), Bridge protocol data unit (BPDU), Label Distribution Protocol (LDP), Ethernet Ring Protection Switching (ERPS) v2, Weighted Deficit Round Robin (WDRR), Switch Resource Management (SRM), LLDP-MED, Ethernet OAM, Weighted Round Robin (WRR), MAC based VLAN, loopback detection, Hybrid OpenFlow 1.3, port-based VLAN, D-Link Discovery Protocol (DDP), Committed Information Rate (CIR), Microsoft Network Load Balancer (NLB) | | Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1v, IEEE 802.1ag, IEEE 802.1AX, IEEE 802.1Qbb, ITU-T Y.1731 | | Device Type | Switch - 54 ports - L3 - Managed - stackable | | Enclosure Type | Front to back airflow rack-mountable 1U | | Status Indicators | Power, status, link/activity, fan, stack, locator | | Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, SMTP | | Capacity | Packet buffer size: 32 MB ¦ IPv4 routes (static): up to 32000 ¦ IPv6 routes (static): up to 16000 ¦ IPv4 forwarding entries: up to 144000 ¦ IPv6 forwarding entries: up to 144000 | | MAC Address Table Size | 288K entries | | Encryption Algorithm | SSL, TLS 1.2 | | Routing Protocol | RIP-1, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, DVMRPv3, MLDv2, MLD, VRRPv2, MPLS, VRRPv3, MSTP, RSTP, STP | | Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2) | | Performance | Switching capacity: 2.16 Tbps ¦ Forwarding rate: 1.60704 Gpps ¦ Stacking bandwidth: 1.2 Tbps | | Ports | 48 x 1 Gigabit / 10 Gigabit Ethernet + 6 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28 | | Jumbo Frame Support | 9216 bytes | | Subtype | 10 Gigabit Ethernet | Expansion / Connectivity | Interfaces | 48 x 10GBase-T RJ-45 with MACsec ¦ 6 x 100Gbit/40Gbit LAN QSFP28/QSFP+ ¦ 1 x console RJ-45 ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x alarm RJ-45 ¦ 1 x micro-USB 2.0 Type A | Manufacturer Warranty | Service & Support | Limited warranty - lifetime | Miscellaneous | Compliant Standards | VCCI, C-Tick, cUL, CB, IC, FCC, LVD | | Rack Mounting Kit | Included | | Cables Included | 1 x console cable ¦ 1 x micro-USB to USB cable | | Included Accessories | 4 rubber feet, 2 x 19" mounting brackets | Power | Power Device | Internal power supply - hot-plug | | Voltage Required | AC 100-240 V (50/60 Hz) | | Power Consumption Operational | 330.2 Watt | | Installed Qty | 2 | | Max Supported Qty | 2 | | Power Redundancy | Yes | | Power Redundancy Scheme | 1+1 | | Power Consumption Stand by | 108.2 Watt | Software / System Requirements | Software Included | Standard Image (SI) Software | Environmental Parameters | Min Operating Temperature | 0 °C | | Max Operating Temperature | 45 °C | | Humidity Range Operating | 0 - 95% (non-condensing) | | Min Storage Temperature | -40 °C | | Max Storage Temperature | 70 °C | | Humidity Range Storage | 0 - 95% (non-condensing) | Dimensions & Weight | Width | 44.1 cm | | Depth | 48.744 cm | | Height | 4.35 cm | | Weight | 9.88 kg |
|