D-Link DGS 3630-28PC - Switch - L3 - Managed - 20 x 10/100/1000 (PoE+) + 4 x combo Gigabit SFP + 4 x 10 Gigabit SFP+ - rack-mountable - PoE+ (370 W) More information: General | Features | ARP support, IGMP snooping, DoS attack prevention, packet filtering, port mirroring, WRR queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Dying Gasp support, sFlow, PIM snooping, tunnelling, DHCP snooping, ACL support, QoS, IP Precedence, DHCP server, VRF-Lite, MLD snooping, DAI, Safeguard Engine, Cable Diagnostics Function, bandwidth control, LLDP support, Port Security, RSPAN, SNMP trap, DHCP client, Energy Efficient Ethernet, GVRP, SP, Loopback, TFTP client, 4MB packet buffer, 802.1x authentication, Duplicated Address Detection, TRTCM, ToS, PTP, DSCP support, 2 fans, IGMP filtering, SRTCM, IP source guard, Head of Line Blocking Prevention, host based access control, PFC, VTP, BPDU, Link Aggregation, MIB II, SSM, DDM, NTP, AAA, VLAN Double Tagging (Q-in-Q), Loop Guard, ERPS v2, VLAN mirroring, MLD filtering, WAC, SRM |  | Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1v, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.1AX, IEEE 802.1Qbb | | Device Type | Switch - 20 ports - L3 - Managed - stackable | | Enclosure Type | Rack-mountable | | Status Indicators | Status | | Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, CLI | | Capacity | IPv4 routing table entries: 16000 ¦ IPv6 routing table entries: 7000 ¦ IPv4 forwarding table entries: 32000 ¦ IPv6 forwarding table entries: 16000 ¦ VLAN groups: 4000 ¦ Dynamic VLAN entries: 4000 ¦ Static ARP entries: 512 ¦ IPv4 routes (static): 512 ¦ IPv6 routes (static): 256 ¦ QoS hardware queues per port: 8 ¦ ACL entries (egress): 4000 ¦ ACL entries (ingress): 1000 | | MAC Address Table Size | 68K entries | | Encryption Algorithm | MD5, SSL, TLS 1.0, TLS 1.1 | | Routing Protocol | BGP-4, RIP-1, RIP-2, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), DVMRPv3, RIPng, MLDv2, MLD, BGP-4+, VRRPv2, MPLS, Bidirectional Forwarding Detection (BFD), VRRPv3, URPF | | Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2) | | Performance | Switching capacity: 128 Gbps ¦ Forwarding performance: 95.24 Mpps ¦ Stacking bandwidth: 80 Gbps | | Max Units In A Stack | 9 | | Power Over Ethernet (PoE) | PoE+ | | Ports | 20 x 10/100/1000 (PoE+) + 4 x combo Gigabit SFP + 4 x 10 Gigabit SFP+ | | Jumbo Frame Support | 12KB | | PoE Budget | 370 W | Expansion / Connectivity | Interfaces | 24 x 1000Base-T RJ-45 PoE+ ¦ 4 x 1000Base-X SFP ¦ 4 x 10GBase-X SFP+ ¦ 1 x console RJ-45 management ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x USB 2.0 Type A ¦ 1 x alarm RJ-45 ¦ 1 x console (mini-USB) | Manufacturer Warranty | Service & Support | Limited warranty - lifetime | Miscellaneous | Compliant Standards | FCC Class A certified, VCCI, C-Tick, BSMI, cUL, CB, CCC, ITU Y.1731 | | MTBF | 259,222.76 hours | Power | Voltage Required | (50/60 Hz) | | Power Consumption Operational | 44.3 Watt | Software / System Requirements | Software Included | Standard Image (SI) Software | Environmental Parameters | Min Operating Temperature | -5 °C | | Max Operating Temperature | 50 °C | | Humidity Range Operating | 10 - 95% | | Min Storage Temperature | -40 °C | | Max Storage Temperature | 70 °C | | Humidity Range Storage | 5 - 95% | Dimensions & Weight | Width | 44.1 cm | | Depth | 38 cm | | Height | 4.4 cm | | Weight | 5.88 kg |
|