Cisco Catalyst 9162I - Radio access point - GigE, 2.5 GigE - Wi-Fi 6E - Bluetooth - 2.4 GHz, 5 GHz, 6 GHz - cloud-managed - minimum orderable quantity of 10 units More information: General | Width | 20 cm |  | Depth | 20 cm | | Height | 4.445 cm | | Weight | 930 g | | Device Type | Radio access point | | Ruggedized Design | Indoor | Expansion / Connectivity | Interfaces | 1 x 100/1/2.5GBase-T (UPOE) - RJ-45 ¦ 1 x management - RJ-45 ¦ 1 x USB 2.0 | Manufacturer Warranty | Service & Support | Limited warranty - advance hardware replacement - lifetime - response time: 5 days | Networking | Form Factor | External | | Features | WLAN controller mode, LLDP support, Maximum Ratio Combining (MRC), universal power over Ethernet (UPOE), cyclic shift diversity (CSD), beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, band steering, Dynamic Frequency Selection (DFS), secure boot, 2x2:2 MU-MIMO technology, realtime network analytics, PowerSave, security slot (Kensington security lock compatible), High Efficiency (HE) support, image signing, Cisco Trust Anchor module, BSS Coloring, Target Wake Time (TWT), intelligent capture, Tri-Band 2x2, CleanAir Pro technology | | Connectivity Technology | Wireless | | Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 2.5 Gigabit Ethernet, Bluetooth 5.1 LE, IEEE 802.11ax (Wi-Fi 6E) | | Compliant Standards | IEEE 802.3, IEEE 802.11, IEEE 802.3ab, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.11ac, IEEE 802.3bt, IEEE 802.11ax, Wi-Fi CERTIFIED 6E | | Data Transfer Rate | 3.9 Gbps | | Status Indicators | Status | | Remote Management Protocol | HTTP | | Encryption Algorithm | AES, PEAP, WPA2-Enterprise, EAP-SIM, WPA3-Enterprise, WPA3-Personal, EAP-FAST, WPA3-Enhanced Open, WPA2-Personal, EAP-TLS, EAP-TTLS, MSCHAPv2, EAP-GTC, PEAPv1 | | Authentication Method | MS-CHAP, MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM | | Line Coding Format | OFDMA | | Spread Spectrum Method | OFDMA | | Frequency Band | 2.4 GHz, 5 GHz, 6 GHz | | Cloud-Managed | Yes | Miscellaneous | Compliant Standards | FCC Part 15.247, AS/NZS 60950-1, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.407, FCC CFR47 Part 15 B, UL Class III, CNS13438:2006, RSS-247, AS/NZS 2772.2, CAN/CSA-C22.2 No. 60950-1, VCCI-CISPR 32:2016, RSP-100, RSS-GEN, EN 301 893 V2.1.1, AS/NZS 4268:2017, EN 300 328 V2.2.2, EN 50385:2017, 47 CFR Part 2.1091, QCVN 112:2017, Japan Std. 66, Japan Std. 71, EN 55032:2015/A11:2020, EN 61000-3-3:2013+A1:2019, CAN/CSA-C22.2 No. 62368-1 Third Edition, UL 62368-1 Third Edition, EN 62368-1 Third Edition, IEC 62368-1 Third Edition, EN 301 489-17 V3.2.4 (2020-09), EN 301 489-1 V2.2.3 (2019-11), KS C 9832, EN 62311:2020, KS X 3124:2020, KS X 3126:2020, EN 61000-6-1:2019, Draft EN 303 687 V0.0.14, AS/NZS 62368-1 Third Edition, CISPR 32:2015+AMD1:2019, AS/NZS CISPR32:2015+AMD1:2020, ICES-003 issue 7 Class B, KS C 9835:2019, LP002, EN 55035:2017+A11:2020, EN IEC 61000-3-2:2019+A1:2021, FCC CFR 47 Part 15 Class A | | Pricing Type | Minimum orderable quantity of 10 units | Power | Power Over Ethernet (PoE) Supported | UPOE | Software / System Requirements | OS Required | Cisco IOS XE 17.9.2, Cisco IOS XE 17.10.1 or later | Environmental Parameters | Min Operating Temperature | 0 °C | | Max Operating Temperature | 50 °C | | Humidity Range Operating | 10 - 90% (non-condensing) | Processor / Memory / Storage | RAM | 2 GB | | Flash Memory | 1 GB | Aerial | Antenna | Internal | | Directivity | Omni-directional | | Gain Level | 5 dBi | Internet of Things (IoT) | Internet of Things (IoT) Compatible | Yes | | Communications Technology | Bluetooth Low Energy (LE) |
|