Cisco MDS 9396T - Switch - Managed - 96 x 32Gb Fibre Channel SFP+ - rack-mountable - AC 100/230 V - with 96 x 32Gb Fibre Channel SFP+ transceivers (LC) More information: General | Features | ARP support, Syslog support, Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), SNMP trap, Forward Error Correction (FEC), Transparent (N_Port ID Virtualization - NPIV) mode support, Registered State Change Notification (RSCN) support, port exhaust, Automated Attendant (IVR), Loopback, In-Service Software Upgrade (ISSU), built-in ASIC, Fabric Configuration Server (FCS), Cisco Inter-Switch Link (ISL), NPV Gateway mode, Role-Based Access Control (RBAC), TrustSec support, Power-on self-test (POST), Link cable beacon (LCB), 2 fan trays, Authentication, Authorization and Accounting (AAA), Read Diagnostic Parameters (RDP), Virtual Machine Identity (VMID) support, secure boot, Switched Port Analyzer (SPAN), event management, Port-side intake (PSI), broadcast mode, Anti-Counterfeit Technology, Online Health Management System (OHMS), secure JTAG, zone-based QoS, flow-based QoS |  | Device Type | Switch - 96 ports - Managed - with 96 x 32Gb Fibre Channel SFP+ transceivers (LC) | | Enclosure Type | Rack-mountable 2U | | Status Indicators | System | | Remote Management Protocol | RMON, SNMP 3, HTTPS, SMI-S, SSH-2, CLI, SFTP | | Encryption Algorithm | AES | | Routing Protocol | VRRP, Address Resolution Protocol (ARP) over Fibre Channel | | Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2), LDAP | | Fibre Channel | FC-DA, FC-FLA, FC-FS, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-SP, FCP-4, FC-BB-2, FCP, FCP-2, FC-PI-2, FC-BB-5, FC-BB-3, FC-FS-2, FC-GS-5, FC-SW-4, FCP-3, FC-LS, FC-MI-2, FC-PI-4, FC-FS-3, FC-GS-6, FC-PI-3, FC-SW-5, FC-BB-4, FC-IFR, FAIS, FAIS-2, FC-PI-5, FC-LS-2, FC-SP-2, FC-SB-4, FC-DA-2, FC-MI-3, FC-MSQS, FC-BB-6, FC-SB-5, FC-FS-4, FC-SW-6, FC-GS-7, FC-PI-6, FC-LS-3, FC-NVMe | | Performance | Aggregate bandwidth: 3 Tbps | | Ports | 96 x 32Gb Fibre Channel SFP+ | | Subtype | Fibre Channel | Expansion / Connectivity | Interfaces | 96 x 32Gb Fibre Channel SFP+ LC ¦ 1 x 10/100/1000 Base-T RJ-45 management ¦ 1 x 1000Base-X/10GBase-X SFP+ management ¦ 1 x serial (RS-232) console ¦ 1 x USB | Manufacturer Warranty | Service & Support | Limited warranty - advance parts replacement - 1 year - response time: 10 days | Miscellaneous | Compliant Standards | CISPR 22 Class A, EN 60950, EN 61000-3-2, IEC 60950, EN 61000-3-3, EN55024, UL 60950, EN50082-1, EN 61000-6-1, AS/NZS 3260, EMC, ICES-003 Class A, EN 60825, AS/NZS 3548 Class A, IEC 60825, CAN/CSA C22.2 No. 60950, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, 21 CFR 1040, TS001 | | Included Accessories | 2 fan trays, accessory kit | Power | Features | Bidirectional airflow | | Power Device | Internal power supply - hot-plug | | Voltage Required | AC 100/230 V (50/60 Hz) | | Power Consumption Operational | 555 Watt | | Installed Qty | 2 | | Max Supported Qty | 2 | | Power Provided | 1200 Watt | | Power Redundancy | Yes | | Power Redundancy Scheme | 1+1 | | 80 PLUS Certification | 80 PLUS Platinum | Software / System Requirements | Software Included | 3 x MDS 9396T 32G FC switch 16-port upgrade licence, MDS 9396T Supervisor/Fabric, NX-OS SW Release 8.3.1 | Environmental Parameters | Min Operating Temperature | 0 °C | | Max Operating Temperature | 40 °C | | Humidity Range Operating | 10 - 90% (non-condensing) | | Min Storage Temperature | -40 °C | | Max Storage Temperature | 70 °C | | Humidity Range Storage | 10 - 95% (non-condensing) | Dimensions & Weight | Width | 44.25 cm | | Depth | 56.59 cm | | Height | 8.61 cm | | Weight | 18.88 kg |
|