Cisco Catalyst 9300 (Higher Scale) - Network Advantage - switch - L3 - Managed - 48 x 10/100/1000 (UPOE) - rack-mountable - UPOE (822 W)

General

Features

Trunking, full duplex mode, NSF, WRED, STP support, ACL support, QoS, RSPAN, MIB, VRF, Cisco StackWise-480 technology, Cisco StackPower technology, FNF, 802.1x authentication, FTP client, PTP, MACsec support, 3 fans, VTEP support, CoPP, LISP, SSM, integrated Wireshark, VLAN Double Tagging (Q-in-Q), Private VLAN, CoAP support, SGT caching, AVB, GIR mode

Compliant Standards

IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at

Device Type

Switch - 48 ports - L3 - Managed - stackable

Enclosure Type

Rack-mountable 1U

Status Indicators

Status

Remote Management Protocol

SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF

RAM

8 GB

Capacity

IPv4 routing table entries: 64000 ¦ IPv6 routing table entries: 32000 ¦ Flexible NetFlow entries: 128000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 1000 ¦ Packet buffer size: 32 MB

Flash Memory

16 GB

MAC Address Table Size

32000 entries

Encryption Algorithm

128-bit AES

Routing Protocol

OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, HSRP, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, Bidirectional PIM, MSDP, policy-based routing (PBR), RIPng, MPLS

Performance

Switching capacity: 256 Gbps ¦ Stacking bandwidth: 480 Gbps ¦ Switching capacity with stacking: 736 Gbps ¦ Forwarding rate: 190.48 Mpps ¦ Forwarding rate with stacking: 547.62 Mpps

Power Over Ethernet (PoE)

UPOE

Ports

48 x 10/100/1000 (UPOE)

Jumbo Frame Support

9198 bytes

PoE Budget

822 W

Subtype

Gigabit Ethernet

Expansion / Connectivity

Interfaces

48 x 1000Base-T RJ-45 UPOE ¦ 1 x USB 2.0

Expansion Slots

1 (total) / 1 (free) x Expansion Slot

Manufacturer Warranty

Service & Support

Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - consulting - 90 days

Miscellaneous

Compliant Standards

CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, TVCN 7317, VCCI V-3/2009 Class A, CAN/CSA-C22.2 No. 60950-1

MTBF

337,170 hours

Power

Power Device

Internal power supply - hot-plug

Voltage Required

AC 120/230 V (50 - 60 Hz)

Installed Qty

1

Max Supported Qty

2

Power Provided

1100 Watt

Power Redundancy

Optional

Environmental Parameters

Min Operating Temperature

-5 °C

Max Operating Temperature

45 °C

Humidity Range Operating

5 - 90% (non-condensing)

Min Storage Temperature

-40 °C

Max Storage Temperature

70 °C

Humidity Range Storage

5 - 90% (non-condensing)

Dimensions & Weight

Width

44.5 cm

Depth

48.8 cm

Height

4.4 cm

Weight

7.72 kg