HPE M-Series SN3800M - Switch - L3 - Managed - 64 x 10 Gigabit / 25 Gigabit / 40 Gigabit / 100 Gigabit QSFP28 - back to front airflow - rack-mountable - AC 100 - 264 V

General

Features

Flow control, VLAN support, IGMP snooping, Syslog support, port mirroring, store and forward, IPv6 support, Weighted Random Early Detection (WRED), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, Quality of Service (QoS), reset button, LLDP support, DHCP relay, Per-VLAN Rapid Spanning Tree (PVRST), Virtual Routing and Forwarding (VRF), port isolation, redundant hot swappable fans, cut-through, Precision Time Protocol (PTP), 3 fans, OpenFlow support, Storm Control, RDMA over Converged Ethernet (RoCE), Explicit Congestion Notification (ECN), Priority-Based Flow Control (PFC), Control plane protection (CoPP), Secure Copy (SCP), Virtual Extensible LAN (VXLAN), Multi Chassis Link Aggregation Group (MLAG), Open Shortest Path First (OSPF), Software Defined Networking (SDN), Open Network Install Environment, Network Timing Protocol (NTP), Authentication, Authorization and Accounting (AAA), Root Guard, Loop Guard, Voice VLAN, Top-of-Rack (ToR), IP Security (IPSec) support, Zero-touch provisioning (ZTP), BPDU Filter, Switched Port Analyzer (SPAN), Encapsulated Remote SPAN (ERSPAN), Advanced QoS, 42MB packet buffer, BPDU Guard, JSON and XML (Web Services) APIs, Link Aggregation Group (LAG)

Compliant Standards

IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, X.509, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz

Device Type

Switch - 64 ports - L3 - Managed

Enclosure Type

Back to front airflow rack-mountable 2U

Built-in Devices

32 GB SSD

Status Indicators

Status

Remote Management Protocol

SNMP 1, SNMP 2, Telnet, SNMP 3, TFTP, SSH, SSH-2, CLI, SCP, NTP, DHCP, JSON

RAM

8 GB

Routing Protocol

BGP-4, BGP, IGMPv2, VRRP, OSPFv2, PIM-SM, IGMPv3, PIM-SSM, Multiprotocol BGP, ECMP, Bidirectional Forwarding Detection (BFD)

Authentication Method

RADIUS, TACACS+, Secure Shell v.2 (SSH2), LDAP

Performance

Switching capacity: 12.8 Tbps ¦ Processing rate: 8.33 Bpps ¦ Latency: 850 ns

Ports

64 x 10 Gigabit / 25 Gigabit / 40 Gigabit / 100 Gigabit QSFP28

Jumbo Frame Support

9216 bytes

Subtype

100 Gigabit Ethernet

Expansion / Connectivity

Interfaces

64 x 10/25/40/100Gbit LAN QSFP28 ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x serial RJ-45 ¦ 1 x USB 2.0 Type A

Miscellaneous

Compliant Standards

CB, EMC, RoHS, cTUVus, EN 61000-4-5:2006, EN 61000-4-11:2004, EN 61000-3-3:2013, EN 55024:2010, EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-6:2014, EN 61000-3-2:2014, CU, EN 55032:2012+AC:2013 Class A, IEC60950-1:2005, Second edition + Am1:2009 + Am2:2013, CAN/CSA-C22.2 No. 60950-1-07+A1:2011+A2:2014, ICES-003:2016 issue 6 Class A, LV, TR CU 020/2011, TR CU 004/2011, IEC 60950-1:2005/AMD1:2009, IEC 60950-1:2005/AMD2:2013, VCCI-CISPR 32:2016 Class A, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011+A2:2013, EN 61000-4-2:2002, EN 61000-4-4:2004+A1:2010, FCC CFR47 Part 15 B 2017 Class A, AS/NZS CISPR32:2015 Class A, KN22:2009 Class A, KN24:2009, UL 60950-1:2007 R10.14

Rack Mounting Kit

Included

Cables Included

1 x serial cable

Included Accessories

2 x PSU cable retainer kit

Power

Power Device

Internal power supply - hot-plug

Voltage Required

AC 100 - 264 V (50/60 Hz)

Installed Qty

2

Max Supported Qty

2

Power Provided

1100 Watt

Power Redundancy

Yes

Power Redundancy Scheme

1+1

Electric Current Required

3.5 A

Software / System Requirements

Software Included

Mellanox ONIE

Environmental Parameters

Min Operating Temperature

0 °C

Max Operating Temperature

40 °C

Humidity Range Operating

5 - 85% (non-condensing)

Min Storage Temperature

-40 °C

Max Storage Temperature

70 °C

Dimensions & Weight

Width

42.8 cm

Depth

55.9 cm

Height

8.8 cm

Weight

16.8 kg