HPE Composable Fabric FM 3032Q Front-to-Back Module - Switch - L3 - Managed - 32 x 100 Gigabit QSFP28 - front to back airflow - rack-mountable
General | Features | Full duplex capability, Mesh networking, redundant hot swappable fans, 16MB packet buffer, Virtual Extensible LAN (VXLAN), Network Virtualization using Generic Routing Encapsulation (NVGRE), Top-of-Rack (ToR), 3+1 redundant fans |
| Processor | 1 x Intel: 1.6 GHz |
| Device Type | Switch - 32 ports - L3 - Managed |
| Enclosure Type | Front to back airflow rack-mountable 1U |
| Built-in Devices | 16 GB SSD |
| Remote Management Protocol | Telnet, CLI |
| RAM | 4 GB (installed) / 32 GB (max) DDR4 SDRAM |
| Capacity | IPv4 routing table entries: 128000 ¦ IPv6 routing table entries: 64000 ¦ IPv4 routes: 324000 ¦ IPv6 routes: 168000 |
| MAC Address Table Size | 136K entries |
| Performance | Fabric throughput: 1600 Gbps ¦ Switching capacity: 3.2 Tbps ¦ Switching latency: 500 ns ¦ Throughput: 2 Bpps |
| Ports | 32 x 100 Gigabit QSFP28 |
| Subtype | 100 Gigabit Ethernet |
Expansion / Connectivity | Interfaces | 32 x 100Gbit LAN QSFP28 ¦ 1 x console RJ-45 ¦ 1 x management RJ-45 ¦ 1 x USB Type A |
Manufacturer Warranty | Service & Support | Limited warranty - 1 year |
Miscellaneous | Compliant Standards | CSA, UL, VCCI, EN55022, EN55024, CB, CCC, FCC, IEC 60950-1, GB 4943, GB 9254 |
Power | Features | Front-to-rear air?ow |
| Power Device | Internal power supply - hot-plug |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Power Consumption Operational | 550 Watt |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
Environmental Parameters | Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 90% (non-condensing) |
Dimensions & Weight | Width | 43.7 cm |
| Depth | 55.6 cm |
| Height | 4.38 cm |
| Weight | 10.2 kg |